Jtg-3
11-01-2011, 08:14 AM
Hi all , I have a few sets of older chev rams horn manifolds some straight,($20 each) some canted($30each) and 1 old "log" style($45.00) (possibly off of a 265 ,Gen in photo not included) I also have a pair of tach drive echlin dual point distributers,they both are missing tach parts but are functional dual points ($35.00each)
I have some misc parts from a 1937/8/9 chevy straight axle that I am using in my Henry J project both leaf springs ($50.00 pr.) steering box with column and drag link ($20.00) left and right spindles , will need o.s. bushings (40.00 pr.) when I bought my axle it had 5 bolt front drums on it, I believe they are 49-54 chevy,turnable,(40.00 pr) note these did not fit the spindles at the inner bearing area and rubbed the backing plates,) left and right front brake backing plates with all hardware(25.00 pr.) I also have a straight axle with spindles from ?(possibly 3/4 ton or 1 ton ) part # either 3698295 or 3898295 gm 15, I purchased erroniously it is in primer, shows a little light storage rust , kingpins appear to have been replaced,seem good, 1 or 2 caps are gone, ($125.00)please pm me on site as apposed to the forum, thanks Regards Jim
I have some misc parts from a 1937/8/9 chevy straight axle that I am using in my Henry J project both leaf springs ($50.00 pr.) steering box with column and drag link ($20.00) left and right spindles , will need o.s. bushings (40.00 pr.) when I bought my axle it had 5 bolt front drums on it, I believe they are 49-54 chevy,turnable,(40.00 pr) note these did not fit the spindles at the inner bearing area and rubbed the backing plates,) left and right front brake backing plates with all hardware(25.00 pr.) I also have a straight axle with spindles from ?(possibly 3/4 ton or 1 ton ) part # either 3698295 or 3898295 gm 15, I purchased erroniously it is in primer, shows a little light storage rust , kingpins appear to have been replaced,seem good, 1 or 2 caps are gone, ($125.00)please pm me on site as apposed to the forum, thanks Regards Jim