Doc.
07-21-2005, 02:14 AM
Hey guys and gals. I just wanted to introduce myself. I've been a car nut as long as I can remember. My current project is a 33 ford sedan with a 50's flare. It will be running a blown, hilborn injected, 8BA flatty. The engine is a visual replica of the Yates/Newmire flathead from 1955. It has a 4-71 blower with a one off 2 inch gilmer belt drive, and hilborn 2 port fuel injection. The frame is a boxed original '33 with a 4" dropped straight axle and front discs. I'm still deciding on the tranny.
The body will have a 2"chop and a 4" channel.
My current rides include a duece 3window with a '52 8BA flatty,'39 tranny,'34 rear and '40 juice brakes at all 4 corners. It rides on original friction shocks and springs an a set of steelies. And, a '55 chevy Grafitti tribute car. It's a little more modern with a small block 350 and 700 R 4 auto.
I've been lurking for a while and look forward to contributing to a great board, and learning a lot as I go. Hot Rods rule. I don't know how to post pics but I can email some if anyone wants to see pics of my cars or projects.
Doc.
The body will have a 2"chop and a 4" channel.
My current rides include a duece 3window with a '52 8BA flatty,'39 tranny,'34 rear and '40 juice brakes at all 4 corners. It rides on original friction shocks and springs an a set of steelies. And, a '55 chevy Grafitti tribute car. It's a little more modern with a small block 350 and 700 R 4 auto.
I've been lurking for a while and look forward to contributing to a great board, and learning a lot as I go. Hot Rods rule. I don't know how to post pics but I can email some if anyone wants to see pics of my cars or projects.
Doc.