thirtytwo
07-28-2011, 10:29 PM
good old hotrod ...very fun and well built car...runs and drives great ...i really like the car but way too many project and way too many bills from my recent move to california.........here is the run down
-chevy small block 305...327/350hp cam (aka GM L-79) has a good lope and great power...sounds good with the straight pipes
-2 94 carbs on adaptor with edelbrock intake
-saginaw 3spd (syncro 1rst gear)
-6" chopped superior radiator
-dropd axle /monoleaf spring/split bones
-new kingpins and bushings
-new 62 chevy truck master (like milners car)
-all new brakes stuff...front drums ,shoes,springs,wheel cyl.s, hoses.,lines
-new clutch slave
-57 chevy rear 3.36:1 gear/ new wheel bearings (split rear radius rods made from 1.5"-1/4 wall DOM tubing ....not little beanie wishbones)
-transverse rear spring
-rebuilt driveshaft
-16" wheels chevy bolt pattern all around
-5.25 bfg www
-7.00 bfg www
-old king bee headlights
-54 buick taillights
-orig.1932 ford truck frame (sectioned and z'd so the body looks half channeled but actually has full depth floor)
-32 truck steering box with pitman arm shortened (steers great)
-gloss black enamel
-steel body
-glass 32 grill shell
-seat bottoms and back are finished but need foam and upolstery...also needs door pannels to finish
any questions phone # 16513360522
-chevy small block 305...327/350hp cam (aka GM L-79) has a good lope and great power...sounds good with the straight pipes
-2 94 carbs on adaptor with edelbrock intake
-saginaw 3spd (syncro 1rst gear)
-6" chopped superior radiator
-dropd axle /monoleaf spring/split bones
-new kingpins and bushings
-new 62 chevy truck master (like milners car)
-all new brakes stuff...front drums ,shoes,springs,wheel cyl.s, hoses.,lines
-new clutch slave
-57 chevy rear 3.36:1 gear/ new wheel bearings (split rear radius rods made from 1.5"-1/4 wall DOM tubing ....not little beanie wishbones)
-transverse rear spring
-rebuilt driveshaft
-16" wheels chevy bolt pattern all around
-5.25 bfg www
-7.00 bfg www
-old king bee headlights
-54 buick taillights
-orig.1932 ford truck frame (sectioned and z'd so the body looks half channeled but actually has full depth floor)
-32 truck steering box with pitman arm shortened (steers great)
-gloss black enamel
-steel body
-glass 32 grill shell
-seat bottoms and back are finished but need foam and upolstery...also needs door pannels to finish
any questions phone # 16513360522