Revhead
06-24-2011, 06:17 PM
I have a roadster I started to work on and decided I am over my head. I am only selling the body. I have taken it apart. The rear section is in one piece, but needs work. It has rust through at the top edges, modified wheel wells and tailight holes. The doors are off and one has the skin mostly seperated. both need the latch area fixed. Cowl is apart new feet need to be installed for the cowl "hoop" section.
I have a lot of patch panels, including the feet for the cowl "hoop", wheel wells, rear pan, ALL subrails, lower cowl, lower 1/4, rear 1/4 corners, and a few more. I also have two nice hoods that go with it. A pretty decent decklid and a louvered center section of a decklid skin. Also have a dashrail, that looks ok, but has been split and patched back together.
it's hard to get pics of all of it together since it is in several places, but i'll update this soon with good pics.
This is a pic of the car when I got it... don't be fooled, it needs a lot of metal work, but I have most everything to build it.
again, no frame, just body.
I have a lot of patch panels, including the feet for the cowl "hoop", wheel wells, rear pan, ALL subrails, lower cowl, lower 1/4, rear 1/4 corners, and a few more. I also have two nice hoods that go with it. A pretty decent decklid and a louvered center section of a decklid skin. Also have a dashrail, that looks ok, but has been split and patched back together.
it's hard to get pics of all of it together since it is in several places, but i'll update this soon with good pics.
This is a pic of the car when I got it... don't be fooled, it needs a lot of metal work, but I have most everything to build it.
again, no frame, just body.