oj
06-19-2011, 08:51 AM
This is a complete heidts front end that i removed (the car sat too low because of a 502 engine) and replaced with stock height stuff.
It is complete with spindles, calipers, caliper brackets, rotors, pads, hardware, dual diaphrm 8" booster and offset mounting bracket to clear valve covers. It had a corvette type master cylinder but it has signs of corrosion in it and i wouldn't trust it.
There isn't any miles on it, it was on a long term project and has yet to be driven on the street.
It is complete with spindles, calipers, caliper brackets, rotors, pads, hardware, dual diaphrm 8" booster and offset mounting bracket to clear valve covers. It had a corvette type master cylinder but it has signs of corrosion in it and i wouldn't trust it.
There isn't any miles on it, it was on a long term project and has yet to be driven on the street.