SBC Man A Fre and carbs

[Mr64]

Here's a very rare first issue Man A Fre intake. This intake is NOT missing any of the letters. Usually these are missing the 'L' In ATLANTA making them read AT ANTA. This also has the water outlet facing to left. The later ones were cast with it facing to the right. This is the intake you want if you're building a Milner clone. The intake has had a small crack repair on one of the bolt holes. It is the first hole on the front right. Professionally welded and there a lot of material left so you can file it down as you wish. Intake will come with four side inlet Delco rebuilt Rochester 2 GC's. what you see is what you get. Pictures in a few minutes.

http://i306.photobucket.com/albums/nn261/Mr6t4/MAF1.jpg
http://i306.photobucket.com/albums/nn261/Mr6t4/MAF2.jpg
http://i306.photobucket.com/albums/nn261/Mr6t4/MAF6.jpg
http://i306.photobucket.com/albums/nn261/Mr6t4/MAF3.jpg
http://i306.photobucket.com/albums/nn261/Mr6t4/MAF4.jpg

[Mr64]

Bttt

[Mr64]

Last time before it goes on that auction site with a reserve slightly higher than the price here to cover fees.