dropping axles

[titus]

hey hambers, me and a budy made a jig to drop axles and if any body out ther is interested in getting one dropped let me know...weve done about10 axle so far and they look pretty good, chamber is pretty close on em maybe a degree off one way or another but you could re-adjust. better than alot of the original mor-drops ive seen. you send it to us and will do it, hambers discount and we'd do some horse traden also. im thinkin from 150 to 175 buck. sound fair? if this sounds good let me know

[haring]

Do you have any pictures of ones you've dropped? I'd be interested in seeing how the bend looks. What axles have you used and how deep is the drop?

[titus]

well weve done four A axle two duece commercial axles and three 46-48 axles and one 33-35 axle the A-s are about 2and 3/4drop past what they are (about 3/4) the duece truck ones we dropped about 3 over what they were and sme w/ the 33-35 and the 46-48 axle only about 1-1/2 because the are so short from the perch out. they look petty good some a little better than others but still good, one of the duece c truck one looks identical to the one in my 34 p/u. ill try to grt some pics soon

[haring]

Cool, I'll look forward to seeing them. Let me know when you have the picts. haring@fedora.net

[286merc]

Sounds interesting. Do you have the ability to straighten the cores you get? Ive some A axles that have a slight bow.

[titus]

depends on how badly there bent but more than likely, we liked using the a axles the best