PDA

View Full Version : We drove the six hun Chrysler today--WOO HOO


FEDER
12-06-2003, 10:11 PM
So Me and Fedsled towed home the chrysler today.At first it wouldnt start so pulled the dizzy cap to look at the points.The gap was at least 0.40 so I eyeballed them to a precise half that.Pulled the #1 plug to check for spark and yelled turn it over!Jr reached through the window hit the key and THE FUCKER STARTED!!!! Scared Me at first stood up banged my head on the hood and started laughing.Shut it off put the plug back in then restarted it. Now gas is leakin out the top of the carb like crazy so shut it off.Took the top of the carb off pulled out the float it was half full of water (condensation) I suspect.Drilled a hole in it,drained it then soldered it shut. Reinstalled the float and cleaned the shit out from the bottom of the bowl.Cleaned the gasket surfaces put some aviation gasket sealer on both sides of the old gasket and screwed it back together.Added a quart of tranny fluid to the oil and fired it up again.Seems to run real good but clatters at idle and worse at higher RPMs.Set up the idle and let it run for a few hrs didnt overheat and has 60 lbs oil pressure.The longer it ran the quieter it got.While it was running we washed it all up perty and cleaned the inside.The brakes were on the floor added some brake fluid and three pumps they were up! So ofcoarse with no tabs We took it for a spin.What a riot this thing is COOOOL! The heater defroster lights turnsignals dashlights EVERYTHING seems to work!
GODDAMMIT thats how its supposed to be!! I wish this luck on every HAMBER. Ill take it out for another spin tomorrow and post some pics--Feder

JimC
12-06-2003, 10:28 PM
Try setting the points closer to .016 and see what happens.
I saw the pics when you first posted.
Really nice prize.
Jim

RileyRacing
12-06-2003, 10:30 PM
Bite me. http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif

Lucky sumbitches! I love that "first start" feeling!

Jay

old beet
12-06-2003, 10:36 PM
FED, pick me up at the sushi bar, they cut me off again....OLDBEET

FEDER
12-06-2003, 10:47 PM
Damn BEET if you would slurrin yer words and ask for a DRINK and not a _ _ _ _! Im on my way!!

k-member
12-07-2003, 03:10 PM
I did'nt know Chrysler made a 600.haha from this day forth it was known as the Chrysler 600 A......

briggs&strattonChev
12-07-2003, 09:21 PM
thats AWESOME you lucky asshole haha!!!!

im waiting for the pics!!

Bigcheese327
12-07-2003, 10:08 PM
Old cars are neat, aren't they?