Idiot show on EGAY?!?

[29EHV8]

I have a wanted addy in our classifieds for one of these.I checked one out on ebay.The auction for it just ended.I can't believe how much this little piece of aluminum went for!What are people thinkin?Theres a weiand one on there right now also.Gonna be interesting to see what it goes for eh.Check out the link.........Shiny
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2444432379&category=34 198

[Paul]

if you could count on that as a consistant price it would be worth repopping them.

[29EHV8]

60s,I've got the ball rolling already.I dropped one off at my buddys foundry yesterday........Shiny

[John B]

I like to watch six cylinder chevy stuff on Ebay. I've been watching a set of tube headers and even bidded on them. I went too high at $105 in my opinion. Those used tube headers went for $172.50 when it was all over. You can buy new ones for around $140 or so from Night Prowlers, brockmans and Wirth's all day long. Don't these people do any research? I bought a D&S intake the other day and paid too much for it, but at least it wasn't a piece that I can get some where else. Believe me as cheap (actually poor) as I am if it was available somewhere else cheaper, I'd buy it there.

[Tuck]

Offenhauser lost the molds for those when they started up the old stuff again... you would think they would repop them. Have any idea what it would cost to do a run on those shiney? Were you guys thinking of doing a casting run w/ the offy name on them? jus curious id buy a couple...

[29EHV8]

John B,theres lots of chevy 6 performance stuff round here.Let me know what you need......

Tuck,I'm headin there this morning to see what they've figured out.The one I took em is a Weiand but we can put any name on em! http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif........Shiny

[bgbdlinc]

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2444876205&category=34 198#ebayphotohosting
....Shiny...get your wallet out...

bgbdlinc

[k9racer]

Not trying to sound like spam, About 3 mo. ago I was in Pinstripers shop in Birmingham Alabama and he had some of these adapters in stock. call Sam at 205 328 5141. I hope this helps.

[Tuck]

they should say SHINEY on em...
Old school~ nobody will know

Tuck

[=mike=]

For the price of that Offy setupyou could buy a nice 4 barrel that would beat the ass of most cars with a cobbled 2 barrel setup with half the trouble setting it up . That being said , it is pretty damn cool . . .

[visor]

Yeah.....
Then you can sell them to Speedway.
It won't be long and they will be
made in Taiwan. Bubble Packed and
ready to bolt on.

Man this reproduction thing is killin the Hotrod.
As it has everything else that was once original
and cool.

Repop sucks!
Just an observation http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif http://www.jalopyjournal.com/ubbthreads/images/graemlins/smirk.gif
-----------------------------------------------------------
"If my car looks like the real thing......
can I park here?"

[Jethro]

Hey Shiny...have you thought about doing those for real?...There is a foundry in Victoria that does some car stuff...the guy might even be on the HAMB web page (http://www.achinbackfoundry.com./)

[yorgatron]

www.vintagespeed.com (http://www.vintagespeed.com) has'em for $89.00 they don't say "weiand" and they only got one bolt pattern for the 4bbl. side.and before someone gets on here to complain about how Charlie Price took forever to build your 6x2 set-up,i've bought carbn rebuild kits and assorted hardware from him and he's pretty good about that sort of thing,at least to me-george

[HotRodJosh]

I just sent my mold off to Obrien Truckers to have them cast. I hope to have them in stock soon! Here is a pic and link. Carb Adapter (http://97heaven.com/adapt.html) I hope I can keep them at that price. I will udate as soon as I hear from them. They will be sold ready to go. With all holes drilled and studs installed. They only have the one bolt pattern. Hope this helps!

[Jeff Norwell]

YORGATRON IS RIGHT..VINTAGE SPEED SELL'S EM......now trying to get a hold of him is different story....

[29EHV8]

I just got home from my shop.I talked to my buddy and its a go.We have the pattern guy/mold maker on it.I should be getting em out pretty damn reasonable http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif
Man I didn't think there would be this much interest! http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif
I'll hafta figure out what to put on em?Tucks idea sounds good.hahaha.I guess if I put my name on em they'll hafta be polished!LOL http://www.jalopyjournal.com/ubbthreads/images/graemlins/wink.gif......Shiny

[Mike Paul]

Hey Shiny, I'd be interested in a couple even if it has your name on it. Let me know how much.

[Jeff Norwell]

Yea shiny.....I would be interested too.