View Full Version : New from Dallas Texas
john~N~dallas
08-30-2010, 10:08 PM
My name is John and I live in Plano Texas .. 32 years old and looking to build a hot rod of my own.. I have alot to learn and am willing to help out..if you are near Dallas or Plano area and are building a rod and you need a hand let me know, everyone on this forum knows way more than I do for sure.. But I have the desire to learn. Or if you know of a shop in the area who needs a sort of intern send them my name.. Thanks John
117harv
08-30-2010, 10:44 PM
It's nice to see a strong ambition to learn, keep asking questions and do your research, good luck and welcome to the HAMB.
acadian_carguy
08-30-2010, 10:50 PM
Welcome! You can learn a lot here on the HAMB just by reading the postings, and asking good questions. I know I have learned a lot, and have got some great ideas in helping make my Acadian into a 60's style custom.
firstnomad
08-30-2010, 11:49 PM
John,..................Welcome to the H.A.M.B. ..............................from Arkansas City, KS.
firstnomad
www.angelfire.com/jazz/flatlandstudio (http://www.angelfire.com/jazz/flatlandstudio)
40fordtudor
08-31-2010, 06:18 AM
Hey John, welcome from Rowlett---
pecker head
08-31-2010, 09:18 PM
Word from the Can !
big bad john
08-31-2010, 09:20 PM
John........Welcome to H.A.M.B from Big Bad John:D:D:D:D:D
51fordshoebox
08-31-2010, 09:22 PM
welcome from lewisville/flower mound a good start would be to hit bass's open house friday night...you may just explode.
Okie Pete
08-31-2010, 09:22 PM
John, welcome to the HAMB from Oklahoma.
1stGrumpy
09-01-2010, 07:04 AM
Welcome from Arkansas...
wino01
09-05-2010, 11:32 AM
Welcome from the wave, lots of good info here.
PegLegStrick
09-05-2010, 12:22 PM
Welcome to the H.A.M.B.
DirtyJohn
09-05-2010, 08:52 PM
HowwwwwwwwwwwdEEEE!!! Come check out Day of the Drags in Temple Oct 1-2 and also Pistons and Paint in Denton not long after that. You won't regret it!
stillrunners
09-05-2010, 09:03 PM
welcome John...and here's my shop's address....took me four tries to get that model A motor-trans-rear end all hooked up today....of couse I did forget something once.....
john~N~dallas
09-07-2010, 08:48 PM
Thanks for all the replies... I am currently looking for a model a coupe body and learning as much as I can.
robleticia
09-08-2010, 01:44 PM
Welcome from Angleton!
Philbilly
09-11-2010, 05:36 PM
Welcome from Mississippi.
dragginwagon53
09-14-2010, 08:09 PM
Welcome from Bedford
tromper
09-16-2010, 07:49 PM
Welcome from Irving TX!
Texas-Greaser
09-20-2010, 02:58 PM
I'm always late to the party! Hey from EAST PLANO!
xxwelderxx
09-20-2010, 03:09 PM
Welcome from Anna
Engine-Ear
09-20-2010, 08:45 PM
Milwaukee Wisconsin and the RediRad inventors welcome you!
Chandler
09-20-2010, 09:36 PM
hey john, welcome from rowlett---
x 2
lsmjamison
09-20-2010, 09:38 PM
Welcome from Frisco, TX! What part of Dallas are you from? Look forward to meeting you!
lsmjamison
09-20-2010, 09:42 PM
Jeez, guess i could have looked at your profile first, huh? Anna... Anyway, good HAMB FOLKS in the D/FW area!
Von Psycho
09-20-2010, 09:54 PM
Welcome from Ontario, Canada and good luck with your ventures.
jeepfink
09-20-2010, 09:56 PM
Welcome from So Cal!
Badass
09-25-2010, 12:06 PM
Welcome from Austin!
Rama Lama Ding Dong
09-26-2010, 10:31 AM
Welcome from Austin. Texas
vBulletin® v3.8.7, Copyright ©2000-2012, vBulletin Solutions, Inc.