NICSON speed equipment?

[Louie]

Anyone know anything about the company Nicson out of LA? I know they made intakes etc and also stuff for boats. Anyone kno the history or have any catalog pics?Thanks a lot Louie

[old beet]

K-MEMBER has a Nicson air filter on his A....OLDBEET

[-=LD=-]

Not that its probably much help, I know that Nicson made a fair amount of auto speed equipment before focusing on just marine applications.
And while I personally haven't found much info on 'em, there seems to be alot of nicson loyalty on some of the classic GMC sites, since Nicson apparently was big into the stovebolt aftermarket (though they did also make some Ford stuff too.)

[ESnacky6]

I know they made ALOT of boat speed stuff, for ALOT of different engine applications...

They also did make speed parts for regular cars as well...
Like for Chevy inline six engines, 216, 235 etc. I know they made intakes, headers, heads, side covers, and valve covers for those engines in particular as well...
(p.s.- I'm always looking for Chevy 216/235 Nicson stuff...
ESPECIALLY a side cover for a 235..!!)

I've seen intakes for other engines including Ford, Oldsmobile, and Chevy V8s too...

I have some ads, and a sticker, and a book that is on inline engines that has some cool pics... No working scanner right now or I'd hook you up...
I'll save this thread and when I have it working, I'll hook you up...

[WZ JUNK]

I have one of their aluminum race car gas pedals. I think I am going to donate it to be used in my friend Hooley's Bonneville car.

[tommy]

http://fototime.com/{C9B97C61-9263-471C-942C-8D13B4346763}/picture.JPG

Here is a pair of Nicson marine flame arrestor air cleaners.

[Rocket88]

I've got a set of 324 Olds marine exhaust manifolds. Can't use em on my car but they make great wall hangers.

[FLAT-TOP BOB]

here is a olds intake, just bought on e-bay by a friend of mine for 102.00. see there are some good deals on the bay!

[el Roach]

I'd like some info on them myself...like the looks of those air cleaners. ANYONE? info if they're still in business and an address??
Thanks

[CAS]

I have one Nicson flame arrestor on my nailhead The other is a Badger Products. They appear to be about the same age and are surprisingly similar.
http://home.wi.rr.com/schreindl/pics/nicson.jpg

[max wedge]

I see a lot of hemi boat stuff like exhaust, timing covers and motor mounts/elephant ears.

[Louie]

thanks for the replies guys, nicson made some cool parts, ive got a sbc 3x2 intake thats different, i have to try and find some of those air cleaners. Louie

[FLAT-TOP BOB]

la32, any way you could post a pic of that intake you have?
i would like to see it!

[ChrisDP]

I have 6 of the 2 5/8" air cleaners and a boat parts catalog. I think Nicson went out of business around 1990. My dad got the catalog at a sale after they closed up shop.

[Blownolds]

I've had Nicson stuff as follows:

--early Olds 2x4 intake without the water crossover (can't remember if the carb pads were tilted as marine intakes had them or not)
--finned aluminum Pontiac timing cover
--finned aluminum Ford FE timing cover
--finned aluminum late Olds (350/455) timing cover


I think I've also seen SBC and BBC timing covers at the swaps before too.

PS, if anyone has another Nicson timing cover for the late Olds, I know a guy that needs one.

[seymour]

bttt

[flatoz]

I had a bbc finned timing cover, my understanding is that they did concentrate on boat stuff. the guy who bought it off me was running a bbc in a boat and from memory had other nicson stuff to match.

[PBRmeASAP]

Wayne is repopping the Nicson split manifold....
maybe more stuff in works....

Check under 'Products' and 'McGurk'

http://waynemfgco.com/frame.html

[FNG777]

Have a Nicson dual quad manifold for my 331 Cadillac. Seems like they switched over to Marine products in the 60's. I'm pretty sure they're still in that business today.

[Muttley]

Here's some Nicson stuff I have from my collection of junk. If anyone has one of these flame arrestors they want to part with I'm looking for another.

http://img.photobucket.com/albums/v337/muttley30/Nicson1.jpg

http://img.photobucket.com/albums/v337/muttley30/Nicson2.jpg

http://img.photobucket.com/albums/v337/muttley30/Nicson3.jpg

[roy jones]

Thanx to all the replys fellas much apprpreciated

[spookydave]

Nicson is long gone but Glenwood is still around. They are in Gardena, CA and still make alot of old skool marine speed equipment. They might have some stuff you are looking for.

http://www.glenwoodmarine.net/

[PEDDRO]

I managed to pick up a Nicson foot pedal a couple of years back for about $40. Came with a mount (that I figure attaches to the inner wall of a boat's hull), cable and chromed cable runner. A little too "late" for what I want to build....so it'll probably just hang on the wall forever. A neat piece though.....even though when I bought it I didn't know who/what Nicson was.

[Bluto]

Here's what GMC/Nicson stuff looks like on my '39

They also made a single carb intake I like to find

Yup This truck IS going to Europe with us soon

[HOLLYWQQD]

i know this post is ancient but i thought i'd add a pic of my nicson timing cover/motor mount for SBC

http://img528.imageshack.us/img528/6523/cardbackup009pq9.jpg
Shot at 2008-09-18
http://img528.imageshack.us/img528/92/cardbackup008vf7.jpg
Shot at 2008-09-18
http://img88.imageshack.us/img88/451/cardbackup007ro7.jpg
Shot at 2008-09-18

[Stovebolt]

I got me a Nicson Valve cover
http://i198.photobucket.com/albums/aa167/stvblt/Headers2.jpg
Pat Lash has got himself the same AND a Nicson side plate
http://i198.photobucket.com/albums/aa167/stvblt/IMG_2844.jpg
And there a Nicson one, two and three carb manifolds out there.
http://i198.photobucket.com/albums/aa167/stvblt/100_2358.jpg

[Stovebolt]

And then theres stuff to suit early dipper motors

[amodel25]

I have a Nicson 2 x 1 intake on my flathead ford 6.

[rondobandy]

Here is a 2x2 Nicson on my SBC.
http://www.jalopyjournal.com/forum/attachment.php?attachmentid=489208&stc=1&thumb=1&d=1220038270 (http://www.jalopyjournal.com/forum/attachment.php?attachmentid=489208&d=1220038270)

[Little Wing]

sbc cover

http://i21.photobucket.com/albums/b266/brookridgefarms/Nicsoncover.jpg

[117harv]

Here are a couple of pics of a 331-392 hemi boat timing cover with dog legs thats going into a t coupe gasser i have seen many sbc ones but this is the only hemi i have seen.

[Bosco1956]

Here are a set of spark arrestors :cool:

[Ron In the SHOP]

NICSON used to be right next door to a NAPA store / shop in santa fe springs Calif.

my own shop was just across the street. circa 1982.....

[rob-redm]

I had a Marine Head for a Ford Flatsix, that was just wall art! Someone had tried to welded it and save it. No dice, Gave it away.

[Little Wing]

For the most part how does one date some of this stuff ?? When were the Nicson years ?

[superjunkman]

Here is a 2x2 Nicson on my SBC.
http://www.jalopyjournal.com/forum/attachment.php?attachmentid=489208&stc=1&thumb=1&d=1220038270 (http://www.jalopyjournal.com/forum/attachment.php?attachmentid=489208&d=1220038270)


More pics please, and what valve covers are those?