67Amazon
05-27-2010, 05:28 PM
Hey all, just moved from Sacramento to Ventura a few months back. Don't hold it against me, born and raised in Michigan and will always call that "home"... ;) Can't wait for my first car show down here this weekend (the Santa Maria thing, whatever it is). Should be a good time for all, no doubt...
Currently working on a (you guessed it) '67 Volvo 122s. Got the rear unibody cut out and the back-half put in, got the 8.8" rear end narrowed and ready for axles. Plan to do Mustang II up front with a 347 SB Ford / TKO transmission. More likely a stock 302 at first though. Got it all set up for coil-overs, parallel 4-link, watts linkage, and 12" wide tires out back... Should be riding 4" off the pavement and lookin slick once it's done. Anyway, like most of you I'm sure, I could go on and on... :D
We all know threads are worthless without pics right?!
Axle in the fixture and ready to weld...
http://i83.photobucket.com/albums/j302/TurboTravis/100_0053.jpg
All welded up!
http://i83.photobucket.com/albums/j302/TurboTravis/100_0055.jpg
Rails going in...
http://i83.photobucket.com/albums/j302/TurboTravis/100_0071.jpg
Rails in! (still need to gusset obviously, fan of external gusseting)
http://i83.photobucket.com/albums/j302/TurboTravis/100_0074.jpg
About how it'll sit, plan to run 15x10 smoothies w/ 3"-3.5" BS though.
http://i83.photobucket.com/albums/j302/TurboTravis/100_0023.jpg
Currently working on a (you guessed it) '67 Volvo 122s. Got the rear unibody cut out and the back-half put in, got the 8.8" rear end narrowed and ready for axles. Plan to do Mustang II up front with a 347 SB Ford / TKO transmission. More likely a stock 302 at first though. Got it all set up for coil-overs, parallel 4-link, watts linkage, and 12" wide tires out back... Should be riding 4" off the pavement and lookin slick once it's done. Anyway, like most of you I'm sure, I could go on and on... :D
We all know threads are worthless without pics right?!
Axle in the fixture and ready to weld...
http://i83.photobucket.com/albums/j302/TurboTravis/100_0053.jpg
All welded up!
http://i83.photobucket.com/albums/j302/TurboTravis/100_0055.jpg
Rails going in...
http://i83.photobucket.com/albums/j302/TurboTravis/100_0071.jpg
Rails in! (still need to gusset obviously, fan of external gusseting)
http://i83.photobucket.com/albums/j302/TurboTravis/100_0074.jpg
About how it'll sit, plan to run 15x10 smoothies w/ 3"-3.5" BS though.
http://i83.photobucket.com/albums/j302/TurboTravis/100_0023.jpg