SBC 3x2 intake for 94's [Archive]

View Full Version : SBC 3x2 intake for 94's

Big Dirty

11-19-2003, 11:07 PM

Maybe I'm blind but I've been looking for 3x2 sbc intake with a 3 bolt pattern for strombergs. I've seen the four bolt intakes, but I have'nt even seen any adapter plates. Any info would help!!!

KIRK!

11-19-2003, 11:20 PM

Info:

You smell like poop.

Oh wait. Look for Offy part number 5159 and turn it upside down. Also #4035

The manifold is #3558. It's four bolt.

KIRK!

11-19-2003, 11:22 PM

Also, have our wives stopped yapping yet so mine can bring me some food?

Big Dirty

11-19-2003, 11:24 PM

Negative, she said she's not coming home and you need to fend for yourself!!! Looks like your having beer for dinner

KIRK!

11-19-2003, 11:37 PM

Again?

four-thirteen

11-19-2003, 11:39 PM

Gotta hacksaw and drill with a few bits and a 1.25" holesaw? make the adapters yourself from aluminuim. Dave

Levis Classic

11-19-2003, 11:43 PM

You billetproof guys get all the good food! All you need is hops to survive ya know!

11-20-2003, 09:45 AM

I had a 3 bolt intake a couple years ago. Forget who made it. Offy or Edelbrock.
Clark

burger

11-20-2003, 10:01 AM

I have a 3-bolt Offy 3 x 2 SBC intake in my garage. I'm using it, so you can't have it, but they DO exist. Found mine on eBay for CHEEP.

Ed

tommy

11-20-2003, 10:19 AM

I found an old 3 bolt intake. A friend pluged the old holes and I drilled it for the Rochesters. You could do the opposite if you can find a deal on one.

Big Dirty

11-20-2003, 10:56 AM

Thanks for the imput guys, I'll probably end up making my own adapters like you suggested!!!
Dirty

4t64rd

11-20-2003, 03:00 PM

Are these what you need? Speedway adapters (http://www.speedwaymotors.com/xq/asp/strBase_List./hilt./source.2192/base_no.5605159/str_base_no.3254025%2C385239F8A%2C4258007%2C560100 4%2C5601097%2C5605159%2C5605265%2C5606271%2C665235 BD%2C91011025%2C91011450%2C91011591%2C91011596%2C9 1011598%2C91011599%2C91611000%2C91611001%2C9161100 5%2C/header_title.Street+Rod+Products%2DFuel+System/page_name.prod%5Flist%5Fdisplay%2Easp/search_type.L2%7E694/search_option./deptsearch./dept_id.L2%7E694/dept_id_p./dept_name./dept_name_p.Street+Rod+Products/ShowImages.yes/sq.0/cont.1/intPgNo.1/redirect./qx/product.htm)

Bigcheese327

11-20-2003, 03:06 PM

When I got my Offy intake through Marcus I was offered my choice of three or four bolt.

Crease

11-20-2003, 03:07 PM

3x2 for an SBC Edelbrock C362S.

Big Dirty

11-20-2003, 09:37 PM

Bigcheese- this may be beyond obvious but do you think i could run the adapter plate upside down. Bolt the four side hole to the manifold and leave the 3 side up for the stromberg? From the picture, it looks like the chamber is the same width throughout? What do you think?

Crease- thanks for the part #, I'll keep an eye out for one!!!

Dirty