anyone have a s10 blazer?

[fastbackadam]

hey, does anyone out there have an s10 blazer that they are willing to measure the rearend width for me, I need backing plate to backing plate. I was told by a guy that he had one under his 51 chevy, and I need one for my 50 chevy..also the bolt pattern would be great to..thanks guys..

[onelow48]

I don't have my Blazer any more but I can tell you 4 wheel drive is wider. If your 50/51 is a chevy truck then use a 4x4 88 or back they are 7 5/8 the later ons are 7.5 I have a 48 gmc thats what I used. If this is what ure doing let
me know I plan on bringing it out tomorrow. I can get a number for you.

[fab32]

Bolt pattern is 4 3/4" , standard chevy.

Frank

[4t64rd]

doesn't have s-10 width, but others that could be used.

Carnut rear widths (http://www.carnut.com/specs/rear.html)

[fastbackadam]

i guess i should have been more specific. its a 50 chevy car..thanks guys.. i will check out the site too..

[fastbackadam]

got a rear from a 74 nova..fits ..thanks this can be disreguarded..thanks again