New guy from Classic Instruments

[cpshark22]

Hello everyone, my name is Zac Compton from Classic Instruments. I wanted to join the H.A.M.B discussions to see what is needed out there and what help we can provide in the Hot Rod industry. If you guys ever have any questions with gauges please give us a call at 800-575-0461 we are happy to help.

I want to take the time to invite anyone in our area to the NSRA appreciation day/Classic Instruments open house in Boyne City Michigan. This event is open to anyone that wants to attend, come on over and enjoy an afternoon with a group of car people.

NSRA Appreciation Day/ Classic Instruments open house
Date: Saturday May 15th
Time: 10:00 am to 2:00 pm

Thanks,
Zac

[sgtlethargic]

Welcome.

[captain scarlet]

Welcome great products. Have a complete set of your guages and I am really happy.

Only one comment is the oil pressure could do with being a little better. I have trouble with reading since all the pressure on the engine is at the low end and the guage doesn't have much detail that end.

[BIGREDTODD]

Welcome aboard...

[rarerodder]

Zac, good to have you! You guys have done some really cool 'production' instruments and even more amazing 'custom' stuff! Pricey but as a manufacturing engineer I know what it takes to design, tool, and offer new products.

Traditional is what this board is about which is good in terms we (ok most of us) are not looking for the trendy-flashy products that look dated in 5-10 years but even the most 'traditional' of us still look for the products for our rods that set us apart in the crowd. What is needed are continuously updated options for 'individuallizing' our rods. Tough order to fill-good luck!:D

[Jimbo17]

Welcome:

Sounds like you have some real neat products.

Jimbo

[Straight8's&Aces]

Hello From Bay City

[Stu D Baker]

Welcome to the HAMB Zac. Stu

[barnescole]

welcome to the board, i've always used classic instruments....never been disappointed. that said, i'd really like to see more tach options. specifically in the 2 1/8 inch size. some stylish options for mounting cups would be nice too. and as others have said, not so "hi-tech" looking.

thanks for coming on here, is classic an alliance vendor?

[e1956v]

Welcome from a fellow speedometer guy love Classic Instruments stuff especially conversions of original instruments.

[dsr_54]

welcome

[Dave50]

welcome this place is the best.............. :)

[I_be_moose]

hi!

[fordnutz]

This is the introduction section. You may want to post your question on the main board. It will get a lot more mileage there and response as not everyone comes to the intro section. That being said. Welcome from the great white north. Pat.

[Jettback50]

Howdy. Your gang builds some really nice stuff. Thanks for joining in!

[rockguy92]

Welcome from O-HI-O
The Rock