54 Chev Truck

[gecko54]

I'm putting my truck up for sale. Please feel free to pm me for the details. You can find build pics at photobucket.com search Gecko54. Here are some pics (some taken by others).Do NOT post on the ad please.

[gecko54]

So here are some specs on my truck.
Chassis: Stock frame rails boxed front and rear and epoxy painted.
Front is Mustang II with 2500# air bags, 11 inch power disk brakes, AGR 15:1 power rack and pinion steering and a sway bar.
Rear is Art Morrison four bar with 2700# rolling sleeve air bags, 12 inch power disk brakes. All brake lines are steel braided. Air ride is 8 valve, 8 switch, 3/8 lines, two Thomas compressors mounted under cab.
20 gallon aluminum fuel cell. 3/8 aluminum fuel line. All lines and wires are in the frame.

Drivetrain:
350 chev, basically stock 4 bolt/4barrel carb., coated block hugger headers with flowmaster, exits below the right running board, 350 turbo transmission with B & M shift kit, Griffin aluminum radiator, Ford 9 inch rear with 3:00 gears.

Body: Finished in PPG Blue DP 60 primer with satin clear
Custom front bumper/roll pan, frenched headlights, front fenders sectioned 3 inches, cab is channeled 3 inches and sectioned 2.5 inches. Hood is sectioned 2.5 inches, door handles shaved/electric doors with key fob remote, Custom bed front panel radiused to match cab, bed wood is bamboo on side tilt frame for fuel cell access, rear roll pan with frenched in 48 Chev lights (led) and license plate.

Interior: Finished in White PPG DP Primer, Lizard Skin sprayed through out.
Shaved dash with frenched in 3 3/8 Dolphin gauges, Moon wheel on a chev tilt column, Cut and re-foamed early 90's full size chev truck seat covered in light gray marine grade vinyl with 1.5 inch pleats. Fiberglass headliner with Pioneer CD/Ipod controller, 6 inch JL Audio separates in fiberglass inclosers at kick panels, 200 watt Rockford Fasgate amp with 10 inch sub behind seat. Electric window switches installed and wired. Wired with an EZ 21 curcuit, 90% of the connections are solderd and heat shrunk. The side windows are not installed but I have electric motors, new glass, old glass and all new rubber and felt. There is no heat or A/C.
This truck shows just over 7000 miles since it left the garage for the first time. I have not had any major problems. I have done all the work myself with the exception of the upholstery and pinstripping. It is very detailed.

[gecko54]

Upon Request here are some more pics.

[gecko54]

Here is a link to some build pics. I guess some where having trouble finding it. Hope this helps.http://s248.photobucket.com/albums/gg189/Gecko54/

[gecko54]

Bump

[gecko54]

Weekend Bump

[gecko54]

Bump

[gecko54]

Yeah! It's the weekend.

[gecko54]

Bttt

[gecko54]

annnnnnnnd another bump

[neil dezzotti]

Hey man love tha truck how much you take for???? any trades???? Neil.