FS: 1927 T Roadster Pickup body

[Bugsy]

Here's a rough but workable little dude. It's a 1927 T roadster cab (front half of a touring sedan), T bed, front and rear subframes, lower windshield, stanchions, spare door (with two, vintage bullet holes pre-installed)and new rear back panel for a 27 roadster. As you can see from the pics, it has the usual rust on the lower part of the cowl and some rust through on the top of the cowl. The front subframe is tweaked in a bit but a good shove with the port-a-power will cure it and line the doors back up. The doors do open but are stiff. The bed is basically solid but does need some sheet work. This would be a good, winter body project if you want a cheap rpu. I can send more pics of whatever you want, just PM me.

Thanks!

http://inlinethumb51.webshots.com/43186/2632671020105420768S600x600Q85.jpg (http://entertainment.webshots.com/photo/2632671020105420768xNyHHG)
http://inlinethumb18.webshots.com/45073/2115452410105420768S600x600Q85.jpg (http://entertainment.webshots.com/photo/2115452410105420768DYDCpS)
http://inlinethumb25.webshots.com/44632/2013890280105420768S600x600Q85.jpg (http://entertainment.webshots.com/photo/2013890280105420768GkfYwM)
http://inlinethumb44.webshots.com/45803/2774755520105420768S600x600Q85.jpg (http://entertainment.webshots.com/photo/2774755520105420768pkYxsx)
http://inlinethumb07.webshots.com/326/2985638770105420768S600x600Q85.jpg (http://entertainment.webshots.com/photo/2985638770105420768yhWGqX)

[Bugsy]

$500. Let me know if you have any questions. As always, follow the rules [posted at the top of the page] and send a PM but do NOT post offers, questions, comments or requests on this or any HAMB ad...

[Bugsy]

btt