chrisclarkcustoms
07-19-2009, 07:29 PM
1948 ford cab over engine body. Mounted on a 3/4 ton 91 chevy suburban frame. set up for big block and 700r4 , has drive line motor and trans mounts. The cab has usual rust in the cab corners but thats all. All of the coe only parts are there. Only body panel i dont have is the lower front fender but is the same as regular trucks of this ara f-2 to f-6 48-50. I have no papers but ran the numbers and there clear. Comes with a nice suburban seat and the factory buckets . The photos show the front suspention all the way down (no coils) i was planing on air bags for the front, ride hight is almost level.coils included .. I found another 49 coe thats farther along and dont need 2.
To run it needs steering box, brake booster/master cyl (91 chevy style), steering column/wheel, and your 454 drive train.
any questions call chris-702-415-0166 or e-me @ chrisclarkcustoms@yahoo.com
To run it needs steering box, brake booster/master cyl (91 chevy style), steering column/wheel, and your 454 drive train.
any questions call chris-702-415-0166 or e-me @ chrisclarkcustoms@yahoo.com