TRUCK_RAT
06-14-2009, 11:12 AM
price reduced $6500
or $5500 without wheels and tires
call if serious 620-875-9556
up for grabs is a 37 chevy cab on a custom 2x4 steel frame 12 inch kickup in the rear four in the front all front end parts are new pete and jakes stuff. the rear is a transverse leaf with ladderbars again new pete and jakes pieces. rearend is a 10 bolt from a 72 chevelle with 4.88 gears and a spool. blower and jayster headers as pictured here are not included. but does come with a quadrajet and an intake for it. floor has been channeled approx 3 inches. needs a toe board fabricated. dash has been redone. comes with extra cab to fix the rust hole in the roof. sbc w/3 speed trans or automatic. you choose brand new brake pedal setup from pete and jakes. includes hydraulic clutch master if you want the 3 speed. all new brake lines(speedway kit) almost everything is there to finish this and it's almost all new stuff. oh yeah new griffin radiator. motorvation is from a 68 chevy truck 350 which was supposedly rebuilt shortly before i got it. and it did run and drive in the truck. tank is brand new tanks inc tank.
brand new unisteer single sided rack and pinion setup already installed.
tires are brand new 15x10 wheels in the back 15x5.5 in the front all are 5 on 4.75 bolt pattern
cab was pushed down in the center of the roof and thusly got a large rust spot there i tried to fix another spot where the bed rested against the cab but haven't finished the welding on that either. there is some usual lower rust at the bottom of the doors and in front of them. but it's realistically a fairly decent body. the cowl and firewall areas are super nice.
and ill throw in some used but coated fenderwell headers. if this takes a while to sell i may even keep working on it. but if it gets runnin it ain't gonna be cheap.
trade for running projects of equal value
seriously guys this is a fantastic start
the hard work is pretty much done and 95% of the parts are there to finish her out.
or $5500 without wheels and tires
call if serious 620-875-9556
up for grabs is a 37 chevy cab on a custom 2x4 steel frame 12 inch kickup in the rear four in the front all front end parts are new pete and jakes stuff. the rear is a transverse leaf with ladderbars again new pete and jakes pieces. rearend is a 10 bolt from a 72 chevelle with 4.88 gears and a spool. blower and jayster headers as pictured here are not included. but does come with a quadrajet and an intake for it. floor has been channeled approx 3 inches. needs a toe board fabricated. dash has been redone. comes with extra cab to fix the rust hole in the roof. sbc w/3 speed trans or automatic. you choose brand new brake pedal setup from pete and jakes. includes hydraulic clutch master if you want the 3 speed. all new brake lines(speedway kit) almost everything is there to finish this and it's almost all new stuff. oh yeah new griffin radiator. motorvation is from a 68 chevy truck 350 which was supposedly rebuilt shortly before i got it. and it did run and drive in the truck. tank is brand new tanks inc tank.
brand new unisteer single sided rack and pinion setup already installed.
tires are brand new 15x10 wheels in the back 15x5.5 in the front all are 5 on 4.75 bolt pattern
cab was pushed down in the center of the roof and thusly got a large rust spot there i tried to fix another spot where the bed rested against the cab but haven't finished the welding on that either. there is some usual lower rust at the bottom of the doors and in front of them. but it's realistically a fairly decent body. the cowl and firewall areas are super nice.
and ill throw in some used but coated fenderwell headers. if this takes a while to sell i may even keep working on it. but if it gets runnin it ain't gonna be cheap.
trade for running projects of equal value
seriously guys this is a fantastic start
the hard work is pretty much done and 95% of the parts are there to finish her out.