View Full Version : Anyone else in my ET range ?
The Shocker
06-13-2009, 09:44 PM
I know its not smart to predict your cars ET ,and i dont have to because i know what it runs with me driving.Is there anyone going to the Hamb drags ,thats gunna be close to my e.t.'s ? I know DW ,flamedabone , and several others are faster than me and i know of lots that are slower than me .Is there anyone else going that will be running in the 11.80 -11.90 range ? I would like to match up with some good side by side races if possible for fun ,before eleminations ...
madmak95
06-13-2009, 11:01 PM
im running low 12s. cars can do high 11s if i can keep the front end down and striaght...so im up for some match racin....
The Shocker
06-14-2009, 08:01 AM
im running low 12s. cars can do high 11s if i can keep the front end down and striaght...so im up for some match racin....
Excellent ,look me up then.I will be running the ragidy looking, white and surface rust ,63 Dodge Dart .I am hoping to get it into the 11.70's ,but its gunna be awefull hot in August at Mokan ,so i doubt it will .I ran some 7.50's in the 1/8 a few weeks back in Ardmore ,but everyone i raced was either running the in the 8's or the 6's .Had fun but i either launched and never saw them again ,or they launched and never saw me again.I like a close race better than a slaughter anytime ,even if i loose in the process .See you at the Drags ...
madmak95
06-14-2009, 09:19 AM
ill be in this thing.... i hope...
http://www.jalopyjournal.com/forum/attachment.php?attachmentid=598813&stc=1&thumb=1&d=1234494971 (http://www.jalopyjournal.com/forum/attachment.php?attachmentid=598813&d=1234494971)
I run 11.80 to 12.10 with a stick shift I'll run ya
The Shocker
06-16-2009, 05:10 PM
I run 11.80 to 12.10 with a stick shift I'll run ya
Cool ,that makes 2 good side by side races for me.Whatcha driving ,so i will know who to look for ?
Roothawg
06-22-2009, 01:44 PM
Hopefully, I should be in that range.
The Shocker
06-22-2009, 01:55 PM
Hopefully, I should be in that range.
Dang ,there is gunna be more cars in the high 11's than i thought .Are you the guy with the "Dragin Fly" Model A ?
madmak95
06-22-2009, 07:25 PM
Dang ,there is gunna be more cars in the high 11's than i thought .Are you the guy with the "Dragin Fly" Model A ?
yep ....he's the root.....
Roothawg
06-22-2009, 10:27 PM
Yes sir.
The Shocker
06-23-2009, 07:42 AM
Yes sir.
I have seen you run a few times at the "Thaw" in 08 .Real cool car and sounds good...
Roothawg
06-23-2009, 03:00 PM
That's the last time it was out. We bent 2 pushrods and it was hitting on 7 cylinders. Freakin ebay parts......
got it remedied now.
Henry J
06-24-2009, 12:10 PM
Hey Shocker....I'll be running mid 11's, be glad to hook'em up with you. I agree...they either blow your doors off or they drop out of sight. I'm ready for some fun!!!
The Shocker
06-24-2009, 01:56 PM
Hey Shocker....I'll be running mid 11's, be glad to hook'em up with you. I agree...they either blow your doors off or they drop out of sight. I'm ready for some fun!!!
That Henry J in your Avator looks like it would run mid to low 10's .I dont know if im gunna have enough time to race all of you guys ,but i will do my best to give you all a taste of what the Dart can do ...
Henry J
06-24-2009, 04:37 PM
That Henry J in your Avator looks like it would run mid to low 10's .I dont know if im gunna have enough time to race all of you guys ,but i will do my best to give you all a taste of what the Dart can do ...
Hahaha....thanks for the compliment but its just a mild small block. Easy maintenance and lots of fun. Look me up at the drags...see ya then! :D
Primered Forever
06-26-2009, 08:05 AM
That Henry will run mid 10s but with Posie driving it is a definite mid 11 car!!!!:) Hurry up with the Hemi would you!!!!!
Henry J
06-27-2009, 11:26 AM
That Henry will run mid 10s but with Posie driving it is a definite mid 11 car!!!!:) Hurry up with the Hemi would you!!!!!
Easy now....don't be lashing out!:rolleyes: It's not me holding things up!!!
BTW.....where is that "Barnstormer" sticker at?
ponchoman
06-28-2009, 12:20 AM
Got a new bullet in the '63 Chevy SWB, so I'm shooting for a mid 15. And I'm looking for RossAuto to do a sub 11 in the '37 Willys this year. Likewise for a couple of our other OKC crews.
Roothawg
06-28-2009, 06:30 PM
Someday I need to motor up. I just have too many projects.
The Shocker
06-28-2009, 06:46 PM
Someday I need to motor up. I just have too many projects.
Me to .I have a good stout drag car now ,it just needs more compression and cam to get it where i want it to be .I will just live with it till the weather cools off ,and i get in the mood to work on it some time after the Hamb Drags.Made a vid of the car last Friday making a pass in the heat in Sanger.Its on the Message board if you want to check it out .See you on the 1320 at Mokan...
ORGANGRINDER
07-02-2009, 08:04 AM
what fun is it keeping the front end down??? hurry up and get there....i'm just trying to enjoy the short ride...ha ha !!
im running low 12s. cars can do high 11s if i can keep the front end down and striaght...so im up for some match racin....
Henry J
07-02-2009, 01:45 PM
ill be in this thing.... i hope...
http://www.jalopyjournal.com/forum/attachment.php?attachmentid=598813&stc=1&thumb=1&d=1234494971 (http://www.jalopyjournal.com/forum/attachment.php?attachmentid=598813&d=1234494971)
Hey I like it....looks like a '35 Cudan?
madmak95
07-02-2009, 05:28 PM
Hey I like it....looks like a '35 Cudan?
its a '35/36 ford 4 door. someone cut it up and i found it in a hayfield.... never seen a cudan...
Henry J
07-08-2009, 12:22 PM
its a '35/36 ford 4 door. someone cut it up and i found it in a hayfield.... never seen a cudan...
Cudan is short for coupe/sedan. I've seen a lot of model A's and a few 4 door tri five chevy's done that way....but thats a first for me on your '35! I still think it's cool :D
The Shocker
08-02-2009, 07:01 PM
Anyone else ? Im gunna fill up the tank with pump gas before i leave to make it fair .Naturally aspirated ,wussy cammed ,10 to 1 ,small block Dodge ,with 4.10 gears and 8.5 tires on pump gas ,in a beat up old Dart with no traction bars.Whats there to be scared of ???
http://www.youtube.com/watch?v=cLPbah_LRVs
Dirty2
08-04-2009, 12:03 AM
Adding a little weight to the tired ass sbc !
The Shocker
08-04-2009, 06:47 AM
Adding a little weight to the tired ass sbc !
Roll bar looks good Danny .Now you dont have to worry about my wake flipping that little car over when i pass you, lol...
Dirty2
08-04-2009, 07:13 AM
Roll bar looks good Danny .Now you dont have to worry about my wake flipping that little car over when i pass you, lol...
Pass me ?? :eek: You should be ahead from the start !
The Shocker
08-04-2009, 04:46 PM
Pass me ?? :eek: You should be ahead from the start !
Only time will tell ,but i can hardly wait...
heberlingmopars
08-08-2009, 10:25 PM
My dad will be bringing his 1964 Belvedere with 426 Max Wedge. It should be in the 11's. I'll have my 63 Plymouth, but unfortunatly my Max Wedge is mild.
The Shocker
08-09-2009, 08:28 AM
My dad will be bringing his 1964 Belvedere with 426 Max Wedge. It should be in the 11's. I'll have my 63 Plymouth, but unfortunatly my Max Wedge is mild.
That sounds like a perfect match up .Two early Mopars going at it, Hell ya...
heberlingmopars
08-09-2009, 09:08 AM
That does sound like the perfect match up. Look forward to meeting you there.
andysdeuce
08-09-2009, 11:38 AM
MOPAR..."move over, people are racing!!!". :p:D
Sorry,I couldn't resist.
I'll be bringing my '63 Galaxie...it's only got a little 390 in it.
It might be able to run with the flatties if they aren't too fast.
See youse guys there. Less than two weeks to go now.
The Shocker
08-09-2009, 04:53 PM
My secret weapon .I sealed the scoop to the airhorn on the carb.I hope its good for a tenth ,if not piss on it ,i will pull it off at the track .I have a crazy notion in my peebrain that this Dodge needs some cooler pressurized air feeding it...
Roothawg
08-10-2009, 12:38 PM
That sounds like a perfect match up .Two early Mopars going at it, Hell ya...
Great photo op....
vBulletin® v3.8.7, Copyright ©2000-2012, vBulletin Solutions, Inc.