mounting wishbones part 589

[stevenjerk]

ok i know ive seen alot of posts by this, what i need to know is what is correct king pin angle, from looking at a side view, i heard it was 7 degrees? is that right? not sure, is any angle needed? ive heard that the car tends to wander if king pins are set at 90 degree, anyone know?

[Unkl Ian]

It's called "caster".The kingpins lean back at the top.And 7 degrees will put you in the right neighbourhood.

[flt-blk]

7deg in relationship to the ground, not the frame. If the
frame has a rake you must subtract it.

I have a $10 magnetic angle finder gage I used for all kinds
of stuff; set the engine angle, pinion, caster, check
camber etc..

TZ