PDA

View Full Version : anybody have any idea what these wheels are?


Bill Rinaldi
12-15-2008, 08:47 PM
These 4 wheels and tires came off a 33 Ford coupe. Rear end had a 5" bolt pattern. Front was 4 3/4. The wheels are 5" pattern with a large enough hole that the 4 3/4 pattern lugs fit snug against the side of the hole and used a flat washer and flat lug nut to snug up. The rears fit dead center with with a broad shouldered lug nut.. HONEST!! Question is what wheels are these? All 4 are the same, stamped 15x7 and have a 3 1/2 back space. The back of the wheels have stamped FUME and MEXICO also. SIMPLE GREEN

ProtoTypeDesignFlauz
12-15-2008, 09:43 PM
No, I can tell that they are not stock '33 coupe rims. They must be aftermarket, foreign made jobbies.

Engine Pro 5X
12-15-2008, 09:47 PM
That 1 is a left front >>>>.

Big_Daddy27
12-17-2008, 08:42 AM
Look like old Ansen or American 5 holes. If the tires are any good I'd be turning them around and running that cool ass redline to the outside!!