Can you ID these Chrome Air Cleaners with V8 logos????

[Cadillacin Marcus]

Anyone??? I think they are T Bird they have offset bases they measure 6-7/8" diameter and a base ID of 4-1/4"

[Cadillacin Marcus]

another

[tommy]

http://fototime.com/{B652BDED-9D60-402F-A6DE-52C05EB06B5F}/picture.JPG
After market hot rod stuff. I'd guess Cal custom but don't quote me. I have a 2bbl one also. Are they for sale cheap? http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif

[drgnwgn289]

I think you are right markus, they look very similar to the ones on A54Studebaker's Tbird

[Cadillacin Marcus]

Ive always wanted these and now that i have them, they don't fit!! Id sell them for $50 a pair

[lurch13]

yeah there cal custom

[BigJim394]

That style (with the V8 cutouts on the side) was listed in the 1962 Almquist Catalog, though they did not specify the manufacturer. For 4 barrel carbs they cost $7.25 each, and you had to specify what car they went on so they must have made the offset pair you have for T-Birds. (The model for single or 2 barrels was $3.25). They do show a photo of a similar cleaner (with out the V8 cutouts) that is offset and they say it is for T-Birds and other cars with close together dual quads.

[Cadillacin Marcus]

hmmm ok..thanks..My speed catalogs from the 60's are buried in my storage unit...

[tommy]

The ones I really covet are the ones like the right one in this picture except they have flat spots so that the two will nest together for the 2-4 carb spacing. I was going to try to make my own flat spots if I could find a match.

I found the V8 punched ring in the back ground. The guy thought it was a 57 Chevy piece.
http://fototime.com/%7B97AEAA7E-F5F6-4AE4-85F3-876ECC0F2694%7D/picture.JPG http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif

[Antibilly]

ask Nads he has one

[Cadillacin Marcus]

Those are cool Tommy I've seen those in my catalogs...

[fatabone]

Tommy the one on the right is a Badger. I also need one with the flat spot.

[Cadillacin Marcus]

tommy totally forgot i had a Cal Custom one like that on the left..It was taken along with the rest of my Cal Custom collection...My brother just reminded me of that..I was going to give it to him to run on the T Bird i sold To unclescooby......

[tommy]

Yeah I remember the Badger name now. I found a NOS pair of the flat sided ones in Charlotte but they were made for 2 bbls http://www.jalopyjournal.com/ubbthreads/images/graemlins/confused.gif He wanted too much for me to try and modify them. I'm sure he still owns them.

[slazzen]

Gary Tucker in Elsobrante has some like those