Sheetmetal Question

[BELLM]

I'm an inch man, no, not that kind, I just don't know how to translate sheetmetal gauge into fractions of an inch. Approximately what "inch measurement" would 10 gauge sheetmetal be? Around 1/8? 3/16? Just an approximation.

[manyolcars]

google 'conversion charts'

[mikflathead]

.1345. Just a hair bigger than 1/8. Mike

[C9]

Get yourself a sheet metal gage.
They're round and less than $10. most places.
The gage is stamped on the front and the back is stamped with thousandths.

After you've used it a few times you'll probably have the thousandths aspect of it memorized . . . especially if you're only dealing with a few different gages.