Let's see those shift knobs.....

[Hellbilly_Buzzard]

This is the tiki (http://www.jalopyjournal.com/ubbthreads/showflat.php?Cat=&Board=UBB3&Number=552205&Forum=A ll_Forums&Words=5336&Match=Username&Searchpage=0&L imit=25&Old=allposts&Main=550567&Search=true#Post5 52205) I just got from Jaypee. Thing looks much better in person, but here is a pic anyways.

[Petejoe]

http://img.photobucket.com/albums/v11/petejoe/1937%20Ford%20Coupe/coupe7.jpg

[LeadSledMerc]

Here's mine...

http://img.photobucket.com/albums/v255/GOTCH/33%20Pickup/shifter.jpg

[Coupe-De-CAB]

the first thing i did when i got this car was change the shift knob.
so here's mine... it also has a Bones china bearing in the middle, so the wheel spins and i took a nut off one of my Krux trucks to tighten it on... fits perfect:)
I'm always spinning the darn thing at stop lights!
CAB

[Big Dirty]

Steve, it was good meeting you at BP '04, thanks for coming out, hope to see you next year. Nice coupe by the way!!!!
Jason "Big Dirty"

[Hellbilly_Buzzard]

coupe,

that skate board wheel is brilliant!!!!

[poncho]

i have a few of these bad boys!!
http://i19.ebayimg.com/01/i/01/ba/be/d5_1_b.JPG

[JamesG]

Got's me a new shift knob yesterday.......

[lucky 7]

heres mine...

[flatheadpete]

Is that Grabowski skull? Anyway, here's mine, kinda small. It's a blue mettalic bicycle grip and a bicycle bell for a horn.

[Byron Crump]

Mine...

[TRIUMPH TERROR]

Bought the shift knob off ebay then bought the bike in boxes the shift knob was the whole inspiration for the project as I did not have anything else to put it on at the time.
Later Shoe

[TheFrenZ]

the first thing i did when i got this car was change the shift knob.
so here's mine... it also has a Bones china bearing in the middle, so the wheel spins and i took a nut off one of my Krux trucks to tighten it on... fits perfect:)
I'm always spinning the darn thing at stop lights!
CAB
There isn't a more appropriate shift knob for you than this one,Cab !!! Too cool...
P.S. I had a set of Bones bearings and they were hell when new but after I opened them for the very first time to do some "maintenance", all the thrill was gone...man,they really were expensive...

[SoCalCarCulture]

This one belongs to a friend of mine...

http://images2.fotki.com/v23/photos/9/9586/231786/Dsc03720-vi.jpg

http://images2.fotki.com/v23/photos/9/9586/231786/Dsc03722-vi.jpg

http://images2.fotki.com/v22/photos/9/9586/231786/Dsc03723-vi.jpg

[AV8Paul]

Here's one. It not the knob is't the passenger on the knob.

#2 is the leadglass door knob on my roadster. It's older than the car.

[Tman]

Meet Alfred. He came from Go-Kat-Go in Az. I painted him.

[DK23]

Here's mine.

[snortonnorton]

here is mine

I took a solid piece of one inch aluminum tubing then hollowed out most of it. then threaded one side to fit the 3 way airhose manifold that i got at hardware store. then i took cold rolled steel and hand ground them into spikes and threaded them to go into the airhose ways....

i can remove the spikes when i start riding it because it's dangerous, i guess i can put the spikes back on when i park it!!

[heyitsnate]

mine's an old-timey tat-zapper...

[heyitsnate]

the first thing i did when i got this car was change the shift knob.
so here's mine... it also has a Bones china bearing in the middle, so the wheel spins and i took a nut off one of my Krux trucks to tighten it on... fits perfect:)
I'm always spinning the darn thing at stop lights!
CAB
cab! would it sound funny if i said i checked out your knob at the cow palace show? ..lol...rad! i think the coolest ones represent the driver's craft or personality-nate

[dubie]

here's mine. a piston from a 5 hp briggs and stratton

[rustyparts]

Made these out of cue balls drilled out the top and painted the inside then filled with resin and clear coated them. there a little beat up.

[FLAT-TOP BOB]

here is some from the master--NORM GRABOWSKI

[Toymont]

Here's one. It not the knob is't the passenger on the knob.

#2 is the leadglass door knob on my roadster. It's older than the car.
I have one of those on my 65 Ply. Don't have a pic. Mine is faceted

[JamesG]

This ones going to be a shift knob on something.

[rjb]

This ones going to be a shift knob on something.
I have seen a few people use brass knuckles and they have always looked BADASS cant wait to see what ya use it for.

rjb

[rat bastad]

Heres mine...meet Brainus Horribilus Brootal !!

Rat

[FatRat]

Here's mine.

[Junkyard Dog 32]

Here's one I made out of a cylinder from a revolver.
It was a .22 MAG but I drilled it out to... you guessed it...
.32 AUTO...



http://img.photobucket.com/albums/v156/junkyarddog32/Picture.jpg



JOE:cool:

[tommy]

http://fototime.com/%7B2883822D-5F6F-40AE-AA31-73C0B40A24FE%7D/picture.JPG

My flathead shifter.

[snortonnorton]

Here's one I made out of a cylinder from a revolver.
It was a .22 MAG but I drilled it out to... you guessed it...
.32 AUTO...



http://img.photobucket.com/albums/v156/junkyarddog32/Picture.jpg



JOE:cool:
that's freaking awesome, wish i thought to that.......

[Kojack]

Here's my Tiki guy...

[Kojack]

And his door pull buddy!

[Toyghoul]

Here's a new one still in progress, almost done....http://www.geocities.com/toyghoul/flesh1.JPG

[Toyghoul]

And an older one... http://www.geocities.com/toyghoul/gskull2.JPG

[UNCLECHET]

This one belongs to a friend of mine...

http://images2.fotki.com/v23/photos/9/9586/231786/Dsc03720-vi.jpg

http://images2.fotki.com/v23/photos/9/9586/231786/Dsc03722-vi.jpg

http://images2.fotki.com/v22/photos/9/9586/231786/Dsc03723-vi.jpg

Damn Man, that's got to be the most intricate shift knob I've ever seen! Is it carved from wood? Wow! I think I'd put that in a case. I like it!

[Ron]

This was in my old B'ville

[Ron]

This was in my old Chevy, I think it is on Mike's desk now:(

[Tony Bones]

Chicks are constantly breaking into my car.

[MrManz]

http://img.photobucket.com/albums/v37/petemonti/Andrew/Randoms.jpg
thats mine.

[JohnnyB327]

http://photobucket.com/albums/v428/johnnyb327/?action=view&current=shiftknobb-w.jpg here is mine

[Stone]

Nice shift knobs.How much would one of those tiki heads set me back?

[drhotrodmd]

My Grabowski

[Mootz]

First pic since the new hamb, lets see if it works

http://img.photobucket.com/albums/v220/Mootree/smallinterior.jpg

Mootz

[RileyRacing]

I can't believe leadsleadolds hasn't piped up on this. I got one of these from him.

[Jaypee]

Here´s one of mine.
http://img.photobucket.com/albums/v341/punkrodder/My%20Cars/Modified/DSC00894.jpg

[Jey]

mines a 13mm Snapon Wrench i broke when i was pulling out my motor.

I figured i should keep it where it broke.

[TexV2]

here is mine

I took a solid piece of one inch aluminum tubing then hollowed out most of it. then threaded one side to fit the 3 way airhose manifold that i got at hardware store. then i took cold rolled steel and hand ground them into spikes and threaded them to go into the airhose ways....

i can remove the spikes when i start riding it because it's dangerous, i guess i can put the spikes back on when i park it!!


I wanna see more pics of that bike.....please.

[Dukeofbluz]

My son drew this when he was 14, figured this would be better then hanging it on the fridge.
Duke

http://www.jalopyjournal.com/forum/attachment.php?attachmentid=70273&stc=1
SMhand.jpg

[snortonnorton]

I wanna see more pics of that bike.....please.


you got it man, my friend just finished helping me wire it. I made the frame from lack of norton hardtails.... too much shit to list, i'll let the picture speak for it's self.

months ago Hammer from the horse said he'd put it in the mag, now i have to call him back and tell him i'm finally done since he wanted pictures of me riding it, i had to wait...

[kustom01]

nice sickle!

[mad57olds]

my neighbor got this for me on her honeymoon so i decided to make a shift knob out of it for my 57 olds

[mad57olds]

it would help if i attached the pic

[mad57olds]

ok this is pissing me off cuz i can't figure out how to attach a f%&$ing pic

[mad57olds]

ok this is pissing me off cuz i can't figure out how to attach a f%&$ing pic
ok here ia another pic

[snortonnorton]

nice sickle!

thanks!! it was alot of work, making your own frame is not fun for a beginner...........

let's just say i swore to the lord my next project will be of something with more available parts.

[JoeyOldschool]

Not really a shift knob yet, but its in the works... I plan on using it for my Triumph.... and yes, its a real sword.

http://home.comcast.net/~adelo/shifter.jpg

[leadsleadolds]

I can't believe leadsleadolds hasn't piped up on this. I got one of these from him.

Ok I'll bite.
Heres a few.
http://img.photobucket.com/albums/v378/leadsleadolds/HPIM0033.jpg
http://img.photobucket.com/albums/v378/leadsleadolds/HPIM0148.jpg
http://img.photobucket.com/albums/v378/leadsleadolds/HPIM0238.jpg
http://img.photobucket.com/albums/v378/leadsleadolds/HPIM0304.jpg
http://img.photobucket.com/albums/v378/leadsleadolds/fd6ea639.jpg
http://img.photobucket.com/albums/v232/leadsleadolds2/c59f206f.jpg

[stinkinvw]

Ok I'll bite.
Heres a few.
http://img.photobucket.com/albums/v378/leadsleadolds/HPIM0033.jpg
http://img.photobucket.com/albums/v378/leadsleadolds/HPIM0148.jpg
http://img.photobucket.com/albums/v378/leadsleadolds/HPIM0238.jpg
http://img.photobucket.com/albums/v378/leadsleadolds/HPIM0304.jpg
http://img.photobucket.com/albums/v378/leadsleadolds/fd6ea639.jpg
http://img.photobucket.com/albums/v232/leadsleadolds2/c59f206f.jpg Hey do you sell those? if so i'd be interested in a shrunken head? How much?

[Donzie]

Here's one I made out of a cylinder from a revolver.
It was a .22 MAG but I drilled it out to... you guessed it...
.32 AUTO...



http://img.photobucket.com/albums/v156/junkyarddog32/Picture.jpg

JOE:cool:

That's exactly what I was gonna do but I haven't found any .38 casings for the cylinder. Hmmm, I might have to come up with something else.

[drgnwgn289]

he's my new one

[greaseball]

Just finished painting mine-

Initially I planned on Swaztika's for the eyes, but when my "dream car" was returned to me unfinished and TOTALLY incomplete, I realized a greater evil. $$$

[HeyyCharger]

heres mine...meet brainus horribilus brootal !!

Rat

hahah!

Mad!!!!!!!!

Hc.

[Unkl Ian]

I realized a greater evil. $$$




Definitely !

[THR1LL3R]

Zombie thread,back from the dead.