HELP, Can someone ID this distributor? Parts guru's?

[tinyelvis]

I found this in my attic, I wonder if it would work for my Chrysler. I know the previous owner had an old Plymouth back in '56..

[tinyelvis]

Another pic..

[jerry]

loks like a six cylinder chrsler style dist. the vacuum advance is missing though.


jerry

[tinyelvis]

Yes - It is missing the vacuum advance, unfortunately. Good call on the 6 except it has 8 spark plug holes. Anyone else? You West Coasters up yet?

[tinyelvis]

3rd page already! I'll try again.. anyone? anyone?

[drgnwgn289]

I don't know what it is, but why doesn't it have drive gear?

[FLAT-TOP BOB]

can't tell , but if it's 1838505
hollander shows
60-61 dodge 318 w/o pow. pack w/ auto trans
58-59 ply. 318 w/ auto trans
60-61 ply. 318 w/o pow. pack w/auto trans

[drgnwgn289]

sometimes you amaze me bob

[Turbopackman]

Mopar V8's had a drive gear seperate from the distributor. A gear with the oil pump driveshaft fit in the block between the oil pump and the distibutor.

Eric
(old mopar junkie from way back)

[tinyelvis]

That's dead-nuts flat top, can't thank you enough. http://www.jalopyjournal.com/ubbthreads/images/graemlins/smile.gif

[Swedester]

[ QUOTE ]
can't tell , but if it's 1838505
hollander shows
60-61 dodge 318 w/o pow. pack w/ auto trans
58-59 ply. 318 w/ auto trans
60-61 ply. 318 w/o pow. pack w/auto trans

[/ QUOTE ]
wich means it´ll fit all 318 poly or wedge from 57-92,all 340´s,all 360´sand the late style polys from 55-57 that later became the 318poly,oh. also fits 273.whith a modification to the shaft it´ll fit the older polys and hemis aswell,as the hole in the block is the same size,all you need depending on engine,is a spacer or a shaft adapter.that´s about it,sorry for the long post http://www.jalopyjournal.com/ubbthreads/images/graemlins/wink.gif