Question for the 'So What' guy's

[Circus Bear]

I've heard that one of the trucks is running an S10 frame. If that's true I'd like to get some advice on my build. I'm building a '50 chevy deluxe. but I got the '94 frame dirt cheap, I need the disk brakes and power steering is a nice bonus. We measured the wheel base they're with in a 1/2 inch. Build pics would be great too.

Thanks Dave

[Boones]

all of there trucks are running S-10 frames. they are all queer..not really, they are actually really cool guys even that one they call Clark... Did you check the Tech section, there may be some stuff in there on it, I thought they did a tech post awhile back..

I can tell you from my buddy KustomBuick on the board, that the rear frame kickup is going to interfer with the rear seat. cut all the floors out of the car and sitting it on the frame and build new floors as it will need to be done probably. (see my website for pics of how my buddy did his Buick). I would suggest installing the motor in the frame so you can get firewall measurements. My buddies did not have to cut his, so you may beable to install the motor and set the body on it. He had to make his own body mounts and he used a 4 link for move the rear suspenion back.