PDA

View Full Version : swapping vaccum for electric.....wipers on a 46 chevy pick up


slider
10-14-2003, 11:03 PM
Does anyone know of an electric (12v)wiper system that would work in a 1946 chevy pick up. Anything out of a used car or aftermarket would work. It needs to fit in the space where the vaccum used to go.

286merc
10-14-2003, 11:17 PM
6 and 12V VW Bug wipers were used in lots of conversions in days past. Dunno if adaptable to your p/u.

Bigcheese327
10-14-2003, 11:20 PM
MG roadster and Mini Cooper wiper motors are compact enough to use on a Deuce roadster, so I'll bet they work in your truck! Check junk compacts in the junkyards.

atch
10-15-2003, 09:18 AM
call new port engineering: (636) 239-1698

you won't be disappointed.

Petejoe
10-15-2003, 10:01 AM
Another option is to go to Power Window Specialties. They use a european design cable setup that allows for much room. The actual motor can be mounted remotely anywhere with the cable run to the wiper assy.wipers (http://specialtypowerwindows.com/home.htm)
heres a better explanation wipers 2 (http://www.srbymichael.com/manufacturers/specialty/specialty.shtml)

raven
10-15-2003, 10:06 AM
I put a new port engineering set in my '54.
It's the best for my two-cents worth.
r

38Chevy454
10-15-2003, 11:20 AM
Not sure if your set-up has the wipers on the cowl or above the windshiled. If the wipers are on the cowl, then I give a second recommendation to the Newport Engineering wiper motor. Used that on my 38 Chevy and installed right in place of the vacuum motor and uses the original hook-up linkage.

On my 37 Chevy truck I have the wiper (only one) above the windshield, so if your 46 is the same, I think any universal 12 volt single wiper motor like sold for above the windshield mounting would work for that application.