Adapter for Blue flame to turbo 350??

[Retroline]

Can anyone tell me who has em and do they work?
Do they have mounting for the starter?
Also need to know if a 292 fly wheel will fit.
The engine is from a '58 if that helps.
thanks.
Chad.

[long island vic]

did one on a 54 about a year ago. there is a company upstate neew york that makes a great kit. it was about 400.all bolt on wt there adapter plate. now if i could remember the name. i will sooner or later. it was posted a few months back about the same thimg

[jdubbya]

I am not sure who makes the adapter, but I can tell you that the flywheel wont work. The 350 turbo was introduced many years later, therefore the flywheel doesnt have the holes for the torque converter in it. A new flywheel is around $30-40.00 at the parts store.

[53_210]

Try this:
http://www.stoveboltengineco.com/index1.htm

I don't know if it's the same company, but they sell an adapter.

[Elrusto]

53 210 beat me to it!!

[Retroline]

Thanks alot guys.
53 210 ,I'll give em a try.
Do you think I'll upset anyone putting a blue flame in a Ford F1????

[choprods]

UHHHHHH........Isn't the 62 chevy 235 to aluminum powerglide adapter what you are needing?[One year deal I believe]first year for aluminum powerglide-also cast iron-PG was on most 62's