My new favorite shop supply...

[Bugman]

I don't know how I ever lived without this stuff. 3M's blue plastic tape. It's way more fun than the mask and razor method of taping. http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif

[MercMan1951]

Oh yeah, That's the stuff you want for very thin (i.e. sandable) tape lines...and for laying out flames...If you do a base/clear paint job, and lay your flames out with this, you can bury them in the clear...after wet sanding, they'll be invisible to the touch...just my .02...

[Kulturepimp]

You should try spray mask, sprays out like elmers glue, dries clear, then you draw your graphics and cut with a blade... all the masking is done.. and your set to go..

[Tman]

There is another tape like the blue that is Orange, lays out even better!

[Unkl Ian]

Just don't stretch it too hard when laying out your design,or it will shrink back and cause bleeding.

[Humboldt Cat]

Couldn't agree more, that blue tape's great, recently used it to paper-wrap the wraparound rear window on my '57 Effie for detailed paint stripping, really did the trick well, even when kept on for a long while.