Need new rearend

[Fraz]

Hey guys and girls, Fraz here, needing some stuff to get the Byooik ready for the HAMB drags.

Lookin for an open drive rear, 5x5 bolt pattern, and as close to 59" wide from tire mounting flange to tire mounting flange. I reeeally would like to get a rearend from a 61-63 Buick fullsize car, aka an Invicta, Electra, or Riviera. The driveshaft, coil springs, and all mounting hardware would also be nice. Prefer close to me as possible but willing to drive a bit, despite the cost of gas right now.....

Might also be able to use a rear from a 59-60 Pontiac or Caddy. Maybe newer one from a Chevy truck or 80's Caprice, I'm not picky on what it is, just need the 5x5 bolt pattern and the 59" track width.

If you got somethin or know of somethin please pass it my way, it's been 5 years since I took my baby to the dragstrip and I'm tired of going and not having anything to drive!

[Fraz]

3 day bump. Did more readin, think an early 90's Chevy Caprice will work too. There's gotta be tons of those around, ex copcars and taxis....anyone?

[retired auto worker]

hello also in mo. crawford co. big bolt pat. 78 o79 olds wag. on car 82 olds on car .73 chevy p.u. pos. leaf springs. 67 pont. pos. out .maybe small bolt. pat. someware 61 olds ??? let me know if anything will works.

[61_Poncho_Ventura]

I have one from a 67 Cutlass "complete" you can have. But the rear has to be gone soon, as I need the storage space. zip code 25202

[jackshit]

try 59 edsel corsair rear they have a 5x5 bolt and are 59 in from face to face