Flathead, broken head stud removal. Your tips???

[AV8-Rider]

If I do not remember wrong there where a post a while back regarding removal of broken head studs on flatheads. I did not save this, unfortunately.

Now I need the info. Got a broken one on my motor.

Please let me inn on some experience guys.

Paul

[Zodoff]

If its not broken to far down,weld something to it,and knock it loose.. Use good heat on the welder.
Lykke til!

[Flat Ernie]

There are plenty of ways to do it - I think one of the best ways is the put a nut on/over the broken stud (if it's at least flush) and mig weld it to the stud. After it cools, back it out...good luck!
http://www.jalopyjournal.com/ubbthreads/images/graemlins/cool.gif

[Petejoe]

http://www.fordgarage.com/pages/studremoval.htm

[ponchobilly]

Paul, did you ever get that thing I sent ya? I don't remember.
Good luck- Bil

[AV8-Rider]

Hi guys

this was what I was looking for.
Petejoe: The link is what i remembered. No it's on the disc

Yupp poncho. I got the mag. http://www.jalopyjournal.com/ubbthreads/images/graemlins/laugh.gif I even posted about it on here, sendt dollares to Ryan and all. By now I have read holes in it. I have a spare mag lying in my den for spezial occasions.
Many betes old roadster is one of my all time favorites. The patina on that car is priceless. http://www.jalopyjournal.com/ubbthreads/images/graemlins/smile.gif