Friday Art Show.

[Unkl Ian]

This ia 12" x 12",Green Candy over ground Aluminum.
Design is Vermillion,Fire Red,and Bright Red 1-Shot.

This will make a nice pallet for it's new owner. http://www.jalopyjournal.com/ubbthreads/images/graemlins/cool.gif

[Fast Elvis]

Kool colour combo http://www.jalopyjournal.com/ubbthreads/images/graemlins/cool.gif........I bet the colours look much more vivid in really time Ian.........nice work!!

[Unkl Ian]

Maybe Barnett can post a better pic.

[BARNETT]

The colors and lines are much cooler in person!!! I'll try to get a good shot of it tomorrow, in the daylight. Thanks again, Unkl Ian!!

Here's a cooler I did at the BDK...

[BARNETT]

Jeff Shea designed and screened this metal poster for the BDK. McPhail Sucks. Shea Swallows. http://www.jalopyjournal.com/ubbthreads/images/graemlins/wink.gif

[SinisterCustom]

My wife was cleaning out the closet for a garage sale this weekend and found some old pictures I drew. Most are from high school or a little later. I'd always draw during class but haven't in along time. Don't have the time and never thought I was very good. The wife said to post a few so here they are. http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif

[SinisterCustom]

[SinisterCustom]

60's digger

[SinisterCustom]

Last one for now.

[TINGLER]

Truely some pinstripe mastery going on here! OOOOooohhhh it makes me feel like such an amateur (which I am). It also fires me up to stripe some more....Man you guys are smokin'.

I really dig the high school drawings too. Those are so neat to look at.
They look great too!

Here's one that I made for the L'ville show. I don't think I've shown it before...
Its kinda iffy, cause I was looking at a drawing by another artist as I painted the car. Basically I copied the car....I did it freehand, but its pretty close to the original....maybe too close?

Anyhow here it is. "Beware the Purple People Eater".

http://img.photobucket.com/albums/v188/hotrodtingler/BEWAREPPE.jpg

[whodaky]

Here is 2 cardboard panels I did to send to Scooter for a benefit show he is staging. Each panel has a Whodaky on both sides. I also sent some stuff to Daddyo 54 and Donzie last week, got to find them images for next week! Geoff aka Whodaky http://img.photobucket.com/albums/v167/whodaky/A204.jpg
http://img.photobucket.com/albums/v167/whodaky/A201.jpg http://img.photobucket.com/albums/v167/whodaky/A205.jpg
http://img.photobucket.com/albums/v167/whodaky/A202.jpg

[whodaky]

Here's a couple of models out of my collection. The blue Ranchero is an original issue, I built way back. The Aqua Ranchero is one of the re-releases from a few years back, still a bit to do to this one under the hood and on the chassis. Actually this is sitting on a modified Revell Thunderbolt chassis! Geoff aka Whodaky
Whoops ,forgot to say this. Tingler V, I was never into the monster art stuff. But I must say I do like your style, it is a lot more detailed; very cool stuff.
http://img.photobucket.com/albums/v167/whodaky/A206.jpg http://img.photobucket.com/albums/v167/whodaky/A203.jpg http://img.photobucket.com/albums/v167/whodaky/A207.jpg http://img.photobucket.com/albums/v167/whodaky/A208.jpg http://img.photobucket.com/albums/v167/whodaky/A209.jpg http://img.photobucket.com/albums/v167/whodaky/A2010.jpg

[fatluckys]

Here's a bike seat I did today for Alleycat. Pic courtesy of Hankcash.

[Anderson]

I can still smell the paint coming from these things...

http://www.angelfire.com/retro/ericskars/models/40ford5.JPG

http://www.angelfire.com/retro/ericskars/models/40ford6.JPG

http://www.angelfire.com/retro/ericskars/models/40ford4.JPG

http://www.angelfire.com/retro/ericskars/models/51yellow1.JPG

http://www.angelfire.com/retro/ericskars/models/51yellow2.JPG

http://www.angelfire.com/retro/ericskars/models/51yellow3.JPG

Is it REALLY obvious that they were inspired by fairly recent magazine cars???

And another "bored at work" drawing.

http://www.angelfire.com/retro/ericskars/cartoonA.JPG

[daddyo54]

T-shirt design I did for my upcoming show
http://img.photobucket.com/albums/v224/daddyo54/showcopy.jpg

[kritz]

panel i finished up earlier...pretty crappy photo, but you get the idea

[BARNETT]

metal sign with varigated gold leaf...

[Jester]

Damn I almost don't want to show this but here is some of the work I did Wensday night not all the pics turned out......but heres what nearly turned out.

ceramic tile

http://img.photobucket.com/albums/v349/Jester2469/more%20striping/8-19-04001.jpg

Lucite panel

http://img.photobucket.com/albums/v349/Jester2469/more%20striping/8-19-04002.jpg

Plastic light switch cover

http://img.photobucket.com/albums/v349/Jester2469/more%20striping/8-19-04005.jpg

piston shift knob

http://img.photobucket.com/albums/v349/Jester2469/more%20striping/8-19-04007.jpg

http://img.photobucket.com/albums/v349/Jester2469/more%20striping/8-19-04008.jpg

Art for daddyo54's auction, sorry about the quality but painting on 3 hrs sleep is tough, I'll send somthing better with it I hope.

http://img.photobucket.com/albums/v349/Jester2469/more%20striping/8-19-04009.jpg

Each week the bar gets higher and higher you kats rock.

[Daddy-O]

Cool Stuff everyone. I know I'm gonna get my ass kicked, but I'll say it anyway - BARNETT, you rock!!

Here's a MC tank that I striped for a local bike shop.

http://img.photobucket.com/albums/v257/stripesbyscott/ltctank1.jpg

[Daddy-O]

The rear fender.......

http://img.photobucket.com/albums/v257/stripesbyscott/92a2ced5.jpg

[Daddy-O]

18" x 6", 4 color panel. (On eBay if you like it!)

http://img.photobucket.com/albums/v257/stripesbyscott/3bd7b7ea.jpg

[hamilton]

I'll take an ass kickin'..that "Style" piece is gorgeous Barnett....and Daddy-O, I ALWAYS enjoy your stripes.....here's a stinky one I did a few weeks back...dig!

[scrapmetalart]

Here is my latest.

[scrapmetalart]

2*

[scrapmetalart]

3*

[scrapmetalart]

1 last 1.

[Upchuck]

I recieved these really nice pictures from K-Member a couple weeks ago along with some stickers, I must say they are now sitting proudly in the wifes china/cario(sp?) cabinet!

Thanks again K-Member! http://www.jalopyjournal.com/ubbthreads/images/graemlins/smile.gif

http://img.photobucket.com/albums/v18/bustedford/Kmember002.jpg

[Action Girl]

Kritz....

That panel looks an awful lot like certain girl-parts....

was that the inspiration? http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif

Stacey

[Flexicoker]

[ QUOTE ]
Kritz....

That panel looks an awful lot like certain girl-parts....

was that the inspiration? http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif

Stacey

[/ QUOTE ]

haha, its true, but whats even funnier is that a girl points that out and not a guy http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif

[Slag Kustom]

phone cover 00 MACK did for my boss after it got scratched

[Slag Kustom]

pen drawing hanging in my office by 00 MACK

[dvlscoupe]

It's not art but it's my new local hero creating art at the BDK

[dvlscoupe]

..

[Flexicoker]

those pics are kinda big, do you think you could make them smaller?



http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif

[Buick59]

a picture

[BARNETT]

Hami...nobody does toilet humor as well as you! http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif

Daddy-O...I'm always amazed at your brush control and layouts...very clean.

Metal sign for a tattoo shop in Japan...I've been in a "stars n dots" kinda mood lately. http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif

[Unkl Ian]

Dvlscoupe's new Hero is our very own Safarknut. http://www.jalopyjournal.com/ubbthreads/images/graemlins/cool.gif

[Jester]

next weeks idea's........comming soon to the Friday art show.....

http://img.photobucket.com/albums/v349/Jester2469/more%20striping/sketches.bmp

http://img.photobucket.com/albums/v349/Jester2469/more%20striping/sketches2.bmp

http://img.photobucket.com/albums/v349/Jester2469/more%20striping/sketches1.bmp

[HotRodHon]

Coop Devil I finished up this week on my own leg. http://www.jalopyjournal.com/ubbthreads/images/graemlins/tongue.gif

http://www.hotrodhon.com/satan.JPG

[lostparts]

my daughter's chopper bike frame

[BARNETT]

lostparts...that's cool. I like the way the frame color works up into the fence silloutte (sp?).

O/T, again, but I thought some of you freaks might get a kick outta this sign. It's a double-sided sandwich board (same image on both sides). MDO...about 7' tall.

[leadsleadolds]

All Ive done this week is some stripping practice and a couple of scetches of random crap for different paintings and such.
http://img.photobucket.com/albums/v378/leadsleadolds/HPIM0083.jpg
http://img.photobucket.com/albums/v378/leadsleadolds/HPIM0076.jpg
http://img.photobucket.com/albums/v378/leadsleadolds/HPIM0080.jpg
http://img.photobucket.com/albums/v378/leadsleadolds/HPIM0081.jpg

[BARNETT]

Unkl Ian's panel that I am the proud owner of! I'm not sure my pic is any better, though. http://www.jalopyjournal.com/ubbthreads/images/graemlins/crazy.gif

[dvlscoupe]

Well Flexi I had to shrink it down to nothingness so it would fit the bytes!

[G V Gordon]

Actually worked in the garage instead of painting this week. Great show so far fella's.

[caffeine]

This knuck is from the guys at Classic Choppers in NJ. a small shop that specializes in everything from Flatheads to TC's. This bike will be in Biker mag shortly I believe.

kick ass knuck. and those guys really know what they are doin', anyone in central NJ that needs a cool, small shop that wont forget about you, check these guys out for sure.

it started as this...
see all the pics here
http://s98005534.onlinehome.us/gallery/47redknuck?page=1

-Rob "Caffeine"
http://www.kustompinstriping.com

http://s98005534.onlinehome.us/albums/47redknuck/IMG_4753.sized.jpg

http://s98005534.onlinehome.us/albums/47redknuck/IMG_5019.sized.jpg

http://s98005534.onlinehome.us/albums/47redknuck/IMG_5025.sized.jpg

http://s98005534.onlinehome.us/albums/47redknuck/IMG_5029.sized.jpg

http://s98005534.onlinehome.us/albums/47redknuck/IMG_5032.sized.jpg

http://s98005534.onlinehome.us/albums/47redknuck/IMG_5051.sized.jpg

http://s98005534.onlinehome.us/albums/47redknuck/IMG_5052.sized.jpg

[lostparts]

hey barnett that open sign kicks ass.
just got this pickture of the chopper down loaded, almost done, try-ing to have it ready for the hot rod hoe down in wilmington DE. it's a trike.

[Chaz]

http://people.montana.com/~kaparich/hamb.jpg

I finally finished the sign for my shop and got it mounted on the building. Its about 4 feet square and carved outa signfoam...signfoam is a neat material to work with. It carves primes, sands, holds paint and weathers well.

[Carps]

Awesome as always.

I think I just cancelled cleaning up the yard, gunna hit the shed and spalsh some paint instead.

Hey Caffeine, how do you keep your nails so clean? http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif

[safariknut]

Just a couple of things tonight.Things have been really chaotic this week:My oldest son got married(again)Wednesday and they're having a big party tomorrow so we've been doing that all week.My youngest son's fiancee's brother got killed day before yesterday(long story),my brother-in-law and his wife came up from Tennessee for the WDC and they just left,the house is still mostly in the garage(the floors are in but the painting isn't done),and I'm considering temporary insanity for awhile.Anyway here's a glass vase my wife bought at a yard sale awhile ago that I purloined to stripe.Also a possible design for my new business cards(almost out of the old and I'm changing my phone number).

[safariknut]

Design proposal

[JohnnyB327]

here's a model I've had for a while and the front left tire got fucked so i decided to chop it and channel it. The model is still under construction but here it is now.
Side http://img.photobucket.com/albums/v428/johnnyb327/3window-side.jpg
Front http://img.photobucket.com/albums/v428/johnnyb327/3window-front.jpg

[caffeine]

[ QUOTE ]
Awesome as always.

I think I just cancelled cleaning up the yard, gunna hit the shed and spalsh some paint instead.

Hey Caffeine, how do you keep your nails so clean? http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif

[/ QUOTE ]

I have a beautiful assistant who keeps me supplied with papertowels while taking pictures.....

im also a hand model. DUH!.

-caf

[HotRodHon]

Safariknut: stuff something black in the vase so we can see the design. It' looks pretty cool http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif

[hatch]

Twenty minute rattle can....

[safariknut]

[ QUOTE ]
Safariknut: stuff something black in the vase so we can see the design. It' looks pretty cool http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif

[/ QUOTE ]
Here's another pic against a white background.Nothing special:Just repeated the design on both sides.

[lucky 7]

lostparts,that bike is too cool!!!!!!i love the design on the side...how about a close up!!!very neat....

[whodaky]

Safari, all the stuff you show here is special mate. And we all have weeks like you are having.
Carps, get ut in the yard and do what you got to do, the striping can wait. If it's not cameras it's models, if it's not models it's the comp, if it's not the comp it's striping .I can hear Ann saying. Geoff aka Whodaky

[delaware george]

you should really see lostparts art in person to appreciate how nice it is.


rob caffeine,man you've really been practicing.

barnett,your lettering has got to be some of the nicest in the business.

here's a teaser

[00 MACK]

Hry Caffeine your line consistancy kicks ass and the lies meet real nice . crisp!!!

[unpunk01]

Okay...this isn't hot rod related or striping but I just finished this for a buddy of mine that is really into jazz. This is the first painting I ever did that didn't end up in the bottom of my closet...

http://img.photobucket.com/albums/v254/unpunk01/7c2b85e6.jpg

[unpunk01]

Shit! It didn't load completely...it's Coltrane if you can't tell...

[Carps]

[ QUOTE ]
Carps, get out in the yard and do what you got to do, the striping can wait. If it's not cameras it's models, if it's not models it's the comp, if it's not the comp it's striping .I can hear Ann saying. Geoff aka Whodaky

[/ QUOTE ]

Sounds so familliar, you sure you're not related to her?

And you forgot to mention the 1/1scale cars and my 'other' car based passion. http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif

[ShortBus]

neat stuff youse guys..

Here's a weird one from a crappy thrift store camera that I was experimenting with a while ago.
In the actual photo you can see part of my thumbprint on that button.

http://members.cox.net/rickamado/handle.jpg

[Skate Fink]

[ QUOTE ]


im also a hand model. DUH!.

-caf

[/ QUOTE ]

.......that means that you must do a lot of "hand jobs??" http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif

[Unkl Ian]

[ QUOTE ]
you must do a lot of "hand jobs??"

[/ QUOTE ]

Everyone should find something they are good at,and stick to it. http://www.jalopyjournal.com/ubbthreads/images/graemlins/cool.gif

[daddyo54]

A caddy breather that I painted for a friend. You can't tell but it is candy red and silver base.
http://img.photobucket.com/albums/v224/daddyo54/show005.jpg

[daddyo54]

This is a part off of one of the trophys I'm giving away.
http://img.photobucket.com/albums/v224/daddyo54/show008.jpg

[alteredpilot]

well, i decided to try something a little different this week. its a
15x20 piece of stainless sheet that i burnished with a roloc gasket
removal disc. the orange, green and blue are custom mixed plus
primrose yellow. the pictures are really washed out, but it hink you get the idea... http://img.photobucket.com/albums/v364/alteredpilot/MVC-026F.jpg
http://img.photobucket.com/albums/v364/alteredpilot/MVC-027F.jpg

[BARNETT]

Damn...ya'll are GOOD! http://www.jalopyjournal.com/ubbthreads/images/graemlins/cool.gif

Thanks for the compliment, Delaware George! I'm trying to make myself letter more...I've kinda been slaccking the last year or so...I get caught up doing striping and cut-outs of crazy stuff and forget to actually LETTER something once in awhile! http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif

ShortBus...that is REALLY cool lookin!

[Aushotrods]

Stuffin' round with my little digital camera.
The merc in the photo is slowly gettin finished, will be the photo/magazine whore at the Picnic http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif

[Aushotrods]

Tony's 32 roadster. Gettin re sprayed in some kinda blue, havent decided to go gloss or flat yet, but plans are for some weird tail light placement, '59 caddy tail lights recessed in the upper rear quarters http://www.jalopyjournal.com/ubbthreads/images/graemlins/crazy.gif

[Aushotrods]

Last one http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif

[Steel Phoenix]

[ QUOTE ]
Coop Devil I finished up this week on my own leg. http://www.jalopyjournal.com/ubbthreads/images/graemlins/tongue.gif

http://www.hotrodhon.com/satan.JPG



[/ QUOTE ]

Lookin' good! I like the shading. http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif

[Steel Phoenix]

More 'not car related but still art' stuff:

Steel cuff hammered out of 1/4" square rod...
http://img.photobucket.com/albums/v50/SteelPhoenix/Sculpture/steelcuff01.jpg

Another out of 3/8" rebar (yes, rebar!)
http://img.photobucket.com/albums/v50/SteelPhoenix/Sculpture/steelcuff02.jpg
This one ended up being an exercise in oxy-acetalyne welding too in order to fill in some cracks.

Finally, some letter openers and pointy things:
http://img.photobucket.com/albums/v50/SteelPhoenix/Sculpture/sharpnpointy.jpg

I need to make more stuff! I'm running out of things to share in the Friday gallery! http://www.jalopyjournal.com/ubbthreads/images/graemlins/blush.gif

[Anderson]

those "letter openers" almost look like striping brushes.

[SanDiegoJoe]

[ QUOTE ]
Design proposal

[/ QUOTE ]

reminds me of an eagle with a fish in it's claws

[Steel Phoenix]

[ QUOTE ]
those "letter openers" almost look like striping brushes.

[/ QUOTE ]

yeah, in a way I guess they do.

Striping is one of those things I've been wanting to try...