Let's try pictures again

[50dodge4x4]

See if this works.

[50dodge4x4]

HEY, COOL. This is my 54 Dodge pickup. Here's the rear view.Gene

[50dodge4x4]

While the mojo is still workin, my 50 Dodge 4x4. Gene

[50dodge4x4]

The 50 from the rear.

[zman]

very cool... Except I don't get the rear bumper on the 4x4..

[Slag Kustom]

bumper looks a little funny to me too http://www.jalopyjournal.com/ubbthreads/images/graemlins/confused.gif both trucks look good

[AntiBling]

First one looks good, the 4x4 is, well out of place.

My grandpa has a couple 50 dodges on my farm here that i want to fix up someday. I grew up in the bed of those dodges, they are the reason I became interested in hot rods.

[burndup]

bumper=VISOR, the bad kind, imho.

[willowbilly3]

I like the 54. I used to have one with a 383/torqueflite and the stock 4.88 rear end. It ran like stink up to about 65 when the steering went into convulsions. I eventually put power steering from a chevy 4x4 and an olds tilt column. It was my shop truck, flat red with a push bumper and in the winter 1000# of sand and chains. I had to use it to bump start a Budweiser truck once.
I got it with the 383 already in it but it had taken major firewal surgury to make it fit.

[james]

I'd swap the wheels, those wagon wheels don't look so out of place on a 4x4, and mabye make a cool tube bumper for it, too, lose the late model chrome monster. Cool trucks, though...

[crush1776]

I really dig those old dodge p-ups. I would like to section and chop one someday. Neat affordable rides.

[50dodge4x4]

Thanks guys. The 54 is my wife's truck. It has a 360 with an auto. It has a 5th Ave clip, with the cross torsion bars and an 8 3/4 with 3:23 gears. Not really much of a hot rod, but I'm hopeing to be able to rebuild the 360 over this winter to help it out a little. This truck travels over 10,000 miles every summer.

The back bumper on the 50 happened to show up for $5 when i needed to put something there, I haven't decieded what will be there long term. The 50 is mounted on an 80 Dodge 4x4 frame, 360/auto/3:55 gears. The 4x4 frame was from a snow plow. The cab and front clip came from a 2 ton dump truck. I have built the cab mounts, the cab floor, the front fenders are my creation as well as the bed sides and the tail gate. It's been 2 years getting to this point, I need to use it this winter. If I stumble across some cheap wheels, maybe it will get them, but it needs a new windshield worse. Gene