Help!!! I can Drive, but cant stop!!!

[Cabbie]

I have rebuilt all the wheel cylinders and the master cylinder on my 54, and still dont get much pedal. When I honed the pieces they were pretty chewed up, but I got it close to perfect. WHat eles can I do? The master cylinder cost $220 and looks like it needs to be a special one just cause it is a powerglide tranny. What does this have to do with anything? When I took it out I didnt notice it connected to the tranny in any way.

[millerkustoms]

I would fire the guy that helped you fix your brakes!

[Crestliner]

You can have your master cly. brass sleeved for about 60.00. Look in Hemmings for a number of shops.

[manyolcars]

[ QUOTE ]
You can have your master cly. brass sleeved for about 60.00. Look in Hemmings for a number of shops.

[/ QUOTE ] White Post Restorations In New York will sleeve them with Stainless Steel.

[Cabbie]

Thanks, that will help out. Meanwhile, I guess the foot through the floor board is just gonna have to work.

[34Hupmobile]

Remove the coil wire until you've got it fixed. A car that won't start is infinately safer than one that won't stop. The life you save may be your own.