Just joined - not sure I belong?

[32Tudor]

I guess I'll start with what I am about, and count on you people to let me know if I should stay.

I have been into "Hot Rods" since '86, starting with a 65 El Camino. In '89 I bought a 65 Chevelle 2 door wagon, but really wanted a 32 Ford Sedan. Finally in '99, I found my steal 2 door Sedan and have been working on it ever since. I put it on the road in '05 and have about 6000 miles on it so far.

I am into doing things myself and would hope that this forum would be a resource for me to learn some stuff and to possibly share a few tricks I have come up with along the way.

As far as style, I am not 100% sure what to call it. I understand that "Rat Rod" is out, and that is fine with me. I actually do enjoy seeing them at shows, but that is not what I am going for. I am leaving my Sedan unchopped because I like the way Henry built it. I do have a much better stance with gray spoke Torque Thrust D wheels, a big-n-little set of tires and four links front and rear. I am using polished stainless and aluminum under the hood, in the dash area, and for the exhaust. It does have A/C, leather seats, cruise control, four wheel disk brakes, tilt column, etc.. I have done all the work myself except I started with a stage III frame, and I had an exhaust guy do the custom 2.5 inch pipes.

Some of the home built aspects I am a little proud of are;

polished stainless air intake snorkle, made from 304 stailess exhaust pipe, split down the middle with 3" of sheet metal welded in to make it into a 180 degree oval. It came out nice and I get positive comments.
retracting license plate. This was a $5 solution using a heater duct vacuum servo, a bicycle cable and the hingled plate from an 80s Camaro.I enjoy a good home built solution over a "look what I bought" solution any day.

Let me know if you think I belong.

[Tim]

yup

[shadowmtkustomz]

i don't feel like it is up to anyone to say if someone belongs or not. so with that, i would like to say welcome to the hamb! i hope you enjoy your stay and find what your looking for. this is such a great place, there is so much to see and learn. just try not to get too obsessed like i sometimes get and end up spending more time on the hamb than actually getting out there and working on our old hot rods. i admire all of the home built aspects you've shared. don't stop doing it and share more when you can.

[flathead4d]

Yeah. You should stay. If you got a car or like to work on them that's all that's necessary. However, if you got a thin skin and can't take a few jabs once and a while your in the wrong place. Welcome.

[Nix66]

welcome :)

[skajaquada]

sounds like a street rod...bleh...hang around here and you'll learn better ;)

[paperdog]

see 3window larry for deuce club member information ...
do ya have the required gold chain?

o ya if some one asks ya to share it does not mean the same as your brother taking a humongus bite of your cookie.. it means post pics
i got this wrong at first and have the red mark to prove it..

[Gigantor]

Our opinions are worthless ... especially without pictures!
Welcome to the HAMB.

[Trucked Up]

Welcome, enjoy, pay attention and you'll learn something.:D

[wetatt4u]

A few jabs hahahahahahahahahahahaha
laughed my ass off on that one.....................
Ryan would tell ya that the cut off is year model 1965 ............
You fill the bill on that behalf.....YOUR WELCOME to lurk around or hangout as often as you like ,But for sure DON'T have thin skin.........

[stude_trucks]

Sounds like you are in and if you post of picture or 2, you will probably definitely be in. You seem to already understand and have figured out how to avoid the biggest mistake that pisses some people off before even your first post. Got to give you a lot a credit for that right from the start. I give you my welcome.

[dmac620]

Welcome. Just a quick question though. What part of N.J. is Skillman located in?

[Lazer5000]

I think you'll fit in just fine.

[Lazer5000]

P.s. I love the unchopped idea.

[teddyp]

welcome :D

[elwood blues]

Dude the HAMB is for everyone. You can learn more here than anywere else on the web. Who knows you might stay on for a bit and decide your next hot rod might be a ultra traditional high quality deal.

[Evil Wicked Mean & Nasty]

'32 Ford, Ewwwww, No, go away. Nobody here likes those :D Groucho Marx said, "I'd never join a club that would have me as a member." While the HAMB ain't exactly a club just remember, were just a collection of miss fits anyway. Besides, if you goof up there's always some smart ass right there to tell you what a idiot you are. The HAMB's like life, you run into some really good people and some you could do without. You'll fit in fine.

[BAREOOT]

Just Wanted To Say Welcome

[G V Gordon]

Welcome, hang out for awhile, get a feel for things.

Opinions are welcome but always be prepared for flak from other "opinionated" folk. It's a good place to learn, have a few laughs and meet some really nice people.

GV

[vintagehotrods]

Welcome to the HAMB! Since you own a Deuce Tudor, I'd say you have excellent taste in old Ford's, but then I'm biased. Glad to hear you drive your car and build your own stuff for it. There is plenty to read and learn from this site, especially tech and answers to questions. Try the search feature first and you will be amazed at the volume of information that comes up. Just for fun, make your first search "HAMB Deuce Club" and enjoy the parade.

Contribute if you can, keeping it within the 'traditional" theme of the board.

Like shadowmtkustomz says, the only danger is spending more time here than out in the garage working on you hot rod!

[HOTRODPRIMER]

Welcome to the hamb,,,yeah,you found a new home.

We all have different opinions,,,I would like to see the car. HRP

[meatball]

Welcome to the jungle..maybe down the road post some pics of stuff you've done like the plate idea. you cant help but learn here if you want too!!

[sko_ford]

welcome, pics, d.i.y. or die

[Retrorod]

Welcome.........yeah, come on in. Looks to me like you fit just fine!

[JOECOOL]

They haven't kicked me out yet, and I have a Vega on alcohol !!

[32Tudor]

Central Jersey. More toward the western side. I see a horse farm out my front window. Wish I owned it.

[32Tudor]

No gold chains here. The grease under my finger nails is all the bling I wear aside from my "honey-do" ring.

[3wLarry]

Welcome to the Hamb...now learn how to post some pics of your 32, or you ain't gettin' in the Deuce Club...:p

[5window]

Yeah,you'll do, even with the '32 and coming from NJ. I grew up in Mt Holly, but I sure don't recognize South Jersey anymore. You can learn a lot here and maybe help us, too. Nobody knows it all.Don't be afraid to stick your neck out-that's how the turtle gets ahead. But like the turtle, on the HAMB y'all gotta have a thick shell. Now, where are those pictures?

[Tindall]

welcome to the hamb, before joining, i had no idea what style car i wanted to build, but after searching around and finding traditional style cars, i made the right decision. Maybe i will see you around nj some time when i get my coupe done.
Good luck, and post some pics!!!

[meatball]

FYI....like el gato negro said......like him it was the guys on here that helpped me decide to tackle the PIE WAGON show rod......live & learn holmes,its all here right on the screen

[Kustom7777]

i am in hopewell..the next town over from you,,,,,pm me sometime and ill give you my phone so you can stop by the shop.....

[32Tudor]

Okay here is a picture. I have about 650 more, but mostly of details.

[Cajun Kenny]

nice ride welcome ..

[Evil Wicked Mean & Nasty]

Yep, you're home.

[lothiandon1940]

Oh Yeah, I think you're at the right place. Welcome....Don.
Okay here is a picture. I have about 650 more, but mostly of details.