1931 tudor sedan

[Shawn]

Just wondering if anyone can give my some info on installing door bumpers like where they go and how they are attached

[Mike29Tudor]

Nice looking ride... on your sedan the bumpers are attached to the frame via 2 L shaped mounting arms (extending 14.5 inches) and those are bolted on with FOUR 1/2-20 X 1 1/4 BOLTS, WASHERS AND NUTS. Restoration parts suppliers have these available for about $60 (US) for arms, and $250 (US) for the actual blades themselves. You may need clamp backing plates and covers (polished/chrome) as well depending on how you buy parts. Hope that helps...

[Shawn]

Nice looking ride... on your sedan the bumpers are attached to the frame via 2 L shaped mounting arms (extending 14.5 inches) and those are bolted on with FOUR 1/2-20 X 1 1/4 BOLTS, WASHERS AND NUTS. Restoration parts suppliers have these available for about $60 (US) for arms, and $250 (US) for the actual blades themselves. You may need clamp backing plates and covers (polished/chrome) as well depending on how you buy parts. Hope that helps...
Thanks Mike for your reply it did help and I ended up with them back in the right spots, the car is gold now with just over 6000 miles on it. Shawn