*!*!*!*! Weekend Art Show !*!*!*!*

[Daddy-O]

Well, I've never kicked the art show off before, buthere goes........

This is a 12x18 panel done in a few different reds/pinks. Lets see what the rest of you have been up to!

http://img78.photobucket.com/albums/v257/stripesbyscott/PinkRedBig.jpg

[Jester]

42cc chain saw piston with a bite

http://img78.photobucket.com/albums/v349/Jester2469/piston_growl1.jpg

[Jester]

another angle

http://img78.photobucket.com/albums/v349/Jester2469/piston_growl2.jpg

[Jester]

Smoking Joe do you see a bat?

http://img78.photobucket.com/albums/v349/Jester2469/bat.jpg

[Jester]

one more

http://img78.photobucket.com/albums/v349/Jester2469/flower.jpg

[hamilton]

Damn, I never ever see a Daddy-O piece I don't like...Jester, I dig the bronze background piece, BTW, I thought the design on your card idea was cool, fuhgettabout what it might look like (finger, vag, whatever)...man, run with it!!

Anyway, I don't wanna let the cat outta the bag, so here's just a piece of the larger picture I'm sending the Von Tingler for his Kentucky show in August....dig!

Yuck!

[Toyghoul]

Couple I had layin around http://www.geocities.com/toyghoul/14tray.JPG

[Toyghoul]

http://www.geocities.com/toyghoul/cyclops.JPG

[Jester]

w http://www.jalopyjournal.com/ubbthreads/images/graemlins/shocked.gifw!

[surf monkey]

great stuff as usual
Haven`t posted for a long time....loads of new stuff not scanned yet so heres one i think i`ve posted before
monkey
http://img78.photobucket.com/albums/v244/surfmonkey/wire.jpg

[G V Gordon]

Nice stuff as usual folks!
Not sure this on is finished yet but all I have to offer this week.
Jester, love the piston.

[Jester]

Thanks G V,

Tell you what give me your address and I'll send it to you.....or better yet hunt me up at Ft. Smith's hanging dice and I'll deliver in person.

[Kool Kat]

Some McPhail artwork I said I would post for him a long time ago.

[Anderson]

What the hell...I know some of you are into lowriders.

http://www.angelfire.com/retro/ericskars/models/63low1.JPG
http://www.angelfire.com/retro/ericskars/models/63low3.JPG
http://www.angelfire.com/retro/ericskars/models/63low2.JPG

[Kool Kat]

More McPhail Art.... Sorry fer the shitty pics Dennis.

http://pic5.picturetrail.com/VOL83/511889/4705967/59415896.jpg

http://pic5.picturetrail.com/VOL83/511889/4705967/59415892.jpg

http://pic5.picturetrail.com/VOL83/511889/4705967/59415889.jpg

http://pic5.picturetrail.com/VOL83/511889/4705967/59415884.jpg

http://pic5.picturetrail.com/VOL83/511889/4705967/59415881.jpg

http://pic5.picturetrail.com/VOL83/511889/4705967/59415919.jpg

[A32Flathead]

Seems like its Pinstripe day...as I have NO talent with a brush, heres a couple of pics of some stripes...

http://www.jalopyjournal.com/ubbthreads/images/graemlins/tongue.gif

[A32Flathead]

Toyghoul....Love the trays...that 1st one is killer....

Heres the trunklid of a local Caddy...

[Jester]

borerd at work......easy to see why I can't letter.

http://img78.photobucket.com/albums/v349/Jester2469/doodle.jpg

[Buick59]

If anyone cares.....here are a couple of pics.

[Buick59]

and one more

[Deyomatic]

Surf Monkey, this is amazing. I'm floored.

[loudpedal]

Bitchin' roadster pics Mike!

Haven't I seen that roadster somewhere before? (...wink wink)

LP

[brewsir]

pinstriping day...yeaaa!

[2tall2beahotrodder]

buick59 any more!!!!!!!!!!!!

[Cword]

We're pumped in Calgary, Bonneville is a month away and Brush has thrown his support behind the North of 49 Crew.

Earlier this year Brush opened a training camp for Canadian beaver, the results seen in our beaver after a winter spent training in Ontario are astounding!
http://www.fsra.org/n49/beaver.gif

After getting our beaver into shape for Bonneville Brush went to work on North of 49 itself. The truck really came to life in his hands and is going to be jumping off T-shirts all summer! (We're working on producing them now)
http://www.fsra.org/n49/NO49003.jpg

Thanks Brush! The North of 49 Crew is thrilled to have you aboard!

Mike

[surf monkey]

thanks deyo.....theres some great stuff on here

heres 3 more....all graphite , all A3 in size
http://img78.photobucket.com/albums/v244/surfmonkey/stokers.jpg

http://img78.photobucket.com/albums/v244/surfmonkey/nosponsor.jpg

http://img78.photobucket.com/albums/v244/surfmonkey/ro.jpg
monkey

PS...question for the modellers..when you make a model do you actually glue it together as a mockup first and then tear it apart to paint....forgive my ignorance...i`ve got one to put together (ruin)

[Stone]

[ QUOTE ]
thanks deyo.....theres some great stuff on here

heres 3 more....all graphite , all A3 in size
http://img78.photobucket.com/albums/v244/surfmonkey/stokers.jpg

http://img78.photobucket.com/albums/v244/surfmonkey/nosponsor.jpg

http://img78.photobucket.com/albums/v244/surfmonkey/ro.jpg
monkey

PS...question for the modellers..when you make a model do you actually glue it together as a mockup first and then tear it apart to paint....forgive my ignorance...i`ve got one to put together (ruin)

[/ QUOTE ]
Dudthat is the coolest shit I have seen in awhile.

[Big A]

Mike, Jeff, those Nof49 designs friggin' ROCK!!! Hell ya! Sign me up for a shirt.

Surfmonkey, nice pencil work dude.

[whodaky]

Here's a shot of the dash in my 5 window, I posted it earlier in the week on a post to do with dash art, I did it many years ago. I call it a'map to anywhere but to no where in particular'
Tonygoul, nice work I like looking for different canvas' and your serving trays are right on the money, I have a few different one's here for future works.
Brush that is great work, actually I have a Canadian flag that covers my comp
Surf Monkey, for the most part models are painted and then assembled. Oh by the way I really liked your renderings this week!
I wrote all this out and then go to my photo site and it is under maintenance. So no image. Later maybe

[Anderson]

Surf Monkey...those are awesome. I used to think I could draw! Haha...amazing stuff.

The model question...

The only thing that gets glued together before paint are things that come in halves. For example the engine block/transmission (I usually glue the heads on too). Usually the seats are like that as well. I do that so I can blend in the separation lines and make it look like one piece. Otherwise, I just clean up the casting lines and paint.

Occasionally there's a part or two I paint after installation. The pulley and belt assembly to name one.

[LiL' NiCk]

Killer pieces surf monkey! And great 'striping guys! Been too busy rendering to get 'em on the net, 'ol stuff below.

[Aushotrods]

Finished this one earlier this week. I quite like the rear 'bumper', but i cant remember where it came from, it was a whole bumper that i took middle section out, and recessed into the body, then extended the bottom of the car to fit the bumper better. 59 Chevy caps with WWW out of the '50 ford kit. Motor is a Small block ford (all i had!)

[Aushotrods]

Rear

[Ragtop]

WOW! Jeff always amazes me! Mike - please let us know when the T's are available - I'd love to get one!

[nailhead54]

Last weekend I went to my buddy Bruce's house to stripe some scallops he had just laid out on a '58 wagon. I was supposed to letter the tailgate anyway, so I brought all the supplies to do both jobs.
Green scallops striped in Dark Magenta, The tailgate was done in 23K gold leaf with a Process Green/ Primrose Yellow outline.

[nailhead54]

The Tailgate...

[nailhead54]

This was Bruce's driveway that day. Kinda looks like a diarama...

[nailhead54]

Don't know if I ever posted this...it's pretty old, but I just found the picture...

[Fast Elvis]

nailhead.........bitchin tailgate on that 58!!! http://www.jalopyjournal.com/ubbthreads/images/graemlins/cool.gif

[Skate Fink]

[ QUOTE ]
Don't know if I ever posted this...it's pretty old, but I just found the picture...

[/ QUOTE ]

...RAY!........(that IS you?)......great to see you're still alive. Awesome stuff!!

[nailhead54]

Fast Elvis...thanks, I appreciate that. And Pat (Surf Fink)...I am alive! How is your striping coming along? Will I see you at Sulpy's this year?
Ray

[Skate Fink]

[ QUOTE ]
How is your striping coming along? Will I see you at Sulpy's this year?
Ray

[/ QUOTE ]

...I'm a lot better at talking than I am at striping! Life has been bizarre, but I'm lovin' every minute of it. Sad news....sounds like Sulpy's won't be happening this year http://www.jalopyjournal.com/ubbthreads/images/graemlins/frown.gif
Glad to hear that you are well and I hope Spyder is alive and kickin'........

[Unkl Ian]

[ QUOTE ]
Sulpy's won't be happening this year

[/ QUOTE ]

Definately not.

[crewcutkid]

Oh, wow. I didn't know I could post pictures of my models without getting my ass in a sling! Mebbe I'll post a couple. Nice work, y'all!
-Crew

[nailhead54]

Hey Unk,
I used to get regular emails from Linda, but I'm not sure I sent her my new email address. I wasn't aware that they weren't having the jam this year. I hope everything is ok. Feel free to email me if you have any details.
Thanks.

[Sailor]

Lots of cool stuff.

I especially dug Surf Monkeys Anglia-gasser. Its perfect, bro!

[surf monkey]

sailor!!!! where you been

monkey

[surf monkey]

this is the last one for this week.....hopefully vintage drag racing fans will recognize it
http://img78.photobucket.com/albums/v244/surfmonkey/sandv.jpg

monkey

[cabriolethiboy]

Don't forget the Panel Jam at downtown Anderson, Indiana this coming Saturday(July 17). Hope to see some HAMB'ers there. Info; Steve Hardin
765-378-0796 or hiboycabriolet@aol.com or
www.cruisn.org (http://www.cruisn.org)

[Toyghoul]

Great stuff this week, let's see some more! Here's a couple others I had layin in the corner. http://www.geocities.com/toyghoul/byelltray.JPG

[Toyghoul]

http://www.geocities.com/toyghoul/orangehed.JPG

[Toyghoul]

And a Knob...http://www.geocities.com/toyghoul/hedknob.JPG

[safariknut]

Better late than never I guess.Been in New York all week and this piece was something I refined for a friend.He painted it for his Dad fo a birthday present.A piece of aluminum from the side of an aircraft primed and a pinup painted on.I added some detail to the pinup and added the lettering and bombs.

[Skate Fink]

..OK......I've been wearing Vans shoes since 1975. There was a time when that was weird, then a time when it was cool and now.......a time when it's "Old School." I check their site from time to time. They have "Limited Edition" slip ons. I have bought a few pair of them. They now have a "Design your own" page. I designed these "Rat Rod" slip-ons............
http://www.weirdtrip.com/shots/van2.JPG

....here's the "build sheet...."
http://www.weirdtrip.com/shots/van1a.jpg

[Unkl Ian]

Didn't they have shoes a couple years ago with flame stitching ?
Seen them in the magazines.
Of course I never saw any in person. http://www.jalopyjournal.com/ubbthreads/images/graemlins/frown.gif

I think someone else is doing that now,they have an ad in The Horse with Billy Lane.

[james]

They are doing the design it yourself's again? I had some back in the 80's I did-- don't ask, it was the 80's. I gotta check it out.

[Skate Fink]

[ QUOTE ]
They are doing the design it yourself's again? I had some back in the 80's I did-- don't ask, it was the 80's. I gotta check it out.

[/ QUOTE ]

......yea......back in the "day," several skate shops special ordered color combos for their teams. These, you can order one pair and select the color of EACH part of the shoe! Mine are black with red striping.......... http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif