my latest buy...

[C. Montgomery]

For my Y block going in my 49 coupe.... http://C:\My Documents\My Pictures\myintake.jpg

[Mr. Happy]

Give that to me.




NOW.

Thank you.

[radical56chevy]

thats gonna look good on their..post a pic when ya get it on..

[Chopped50Ford]

wow... I just picked up a Tri-power setup...but because im running a 272...ill just have to fake it...running the center carb only...at least the spectators will think its a hopped up ride...he he he http://www.jalopyjournal.com/ubbthreads/images/graemlins/shocked.gif

[metalshapes]

I saw that one on Ebay.
Would you mind taking a couple of measurements for me, after it is sent to you?
I would like to build a 6X2 U-fab like setup for the Nailhead I am going to use in my Special, and I want it as close as possible to being right...

[Hard On Parts]

Kool, post up after you install.

[leadsleadolds]

Het Metalshapers I think the guy at www.northwestcustoms.net (http://www.northwestcustoms.net) makes that set up for the nailhead you might want to check with them

[BLAKE]

Nice score, Cody... what tranny you using behind the Y-block?

[C. Montgomery]

Blake I don't know- 4 speed? I'd like to put my T-5 behind it but I'm not sure it'll work...Plus it has to be rebuilt..


metalshapes-I should have it by the end of the week..PM me with what you need, I'll try my best to get you what you need...
Cody

[C. Montgomery]

dammit, why is my avitar not showing up?????

[ABone312]

You should go for the T5, you won't regret it. That is what I run behind the 312 in my A. It is well worth having it rebuilt to run it. Just my 2 cents.

[C. Montgomery]

what's involved in putting the t-5 behind it? Started to put one behind the flathead that was in it, modified the bellhousing got the right clutch then found out the trans was no good...basically the same thing for the 292?