need a 3 hour hamb thrash so i can make it!!!!!!

[DIRTYT]

any one out there not doing any thing tommrow from like 7 to 10?? i could really use some help getting my car running and getting the damn motor lined up!!! if i dont get it done tommrow there's no way ill make it http://www.jalopyjournal.com/ubbthreads/images/graemlins/frown.gif http://www.jalopyjournal.com/ubbthreads/images/graemlins/frown.gif sooooooo if any one would like to join me. ill buy some lil ceasers pizza's http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif let me know or give me a call on my celly if u would like to help a brotha out! i dont get home from work till 7 thats why i can do any thing till then.

big thanks in advance guys http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif
Bryan
cell#(586)588-1793

[Stevie G]

I don't have my phone book handy....where is the 586 area code?

[CURIOUS RASH]

Eastern Michigan 810/586 Area Code Split
Telephone customers in Macomb County will be assigned the new 586 area code, while the 810 area code will continue to serve the rest of the area it does today. Telephone customers located along the border of Macomb County should view the prefix list to determine how their area code is affected, as area code boundaries do not precisely match county boundaries.


Dialing Procedures for the 810/586 Optional Period: (From 01/26/02-06/08/02) During this six-month period, calls to Macomb County will complete using either area code. Ameritech calls made between the 810 and 586 area codes may be dialed using 7-digits, or may be dialed using 11 digits (1 + area code + 7-digit telephone number).

Mandatory Dialing Procedures for the 810/586 Areas: The 586 area code must be used for all calls to the new area code. Also at that time, Ameritech calls made between the 810 and 586 area codes must be dialed using 11 digits.

[CherryBlossom]

lmgdao rashy http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif

[DIRTYT]

damnit http://www.jalopyjournal.com/ubbthreads/images/graemlins/crazy.giflol o yea for those who dont know im 45 min norh of deeeeetroiiit michigan!! http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif

[Stevie G]

Uh.....Thank you!!

[Fat Hack]

I should be able to make it...that's 7pm, right??

(PM me with some DIRECTIONS! http://www.jalopyjournal.com/ubbthreads/images/graemlins/cool.gif)

[DIRTYT]

sweet u rule! pm on the way.... thanx hack and yes pm..

[DIRTYT]

any one else http://www.jalopyjournal.com/ubbthreads/images/graemlins/confused.gif http://www.jalopyjournal.com/ubbthreads/images/graemlins/confused.gif

[hotrodladycrusr]

If I could I would but I'm thrashing on my house, yard and garage to get everything spic-n-span for Saturday and basicly I only have tomorrow nite left cuz I'm planning on hitting a huge cruz downriver on Friday nite to pass out some more BilletProof flyers.

Good Luck bud, I'm hoping for the best for ya.

[Fat Hack]

Okay, I'm in...but I'm gonna call shotgun for a ride to Billetproof if we get it goin'! http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif http://www.jalopyjournal.com/ubbthreads/images/graemlins/cool.gif

[DIRTYT]

thanks denise! if need be i can come over early saterday and help with setting up or any thing. im going to have the car at my shop doing some last min things i want to get done b4 the public sees it.

haha hack u will have to fight for that with my girl friend on saterday. becarefull though shes a fire cracker! http://www.jalopyjournal.com/ubbthreads/images/graemlins/shocked.gif

thanks guys..
Bryan

[Fat Hack]

[ QUOTE ]
thanks denise! if need be i can come over early saterday and help with setting up or any thing. im going to have the car at my shop doing some last min things i want to get done b4 the public sees it.

haha hack u will have to fight for that with my girl friend on saterday. becarefull though shes a fire cracker! http://www.jalopyjournal.com/ubbthreads/images/graemlins/shocked.gif

thanks guys..

She can sit in da MIDDLE!! http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif http://www.jalopyjournal.com/ubbthreads/images/graemlins/wink.gif http://www.jalopyjournal.com/ubbthreads/images/graemlins/cool.gif

Fuck...clear me some room on the floor and drop a beer over the back of the seat once in a while! http://www.jalopyjournal.com/ubbthreads/images/graemlins/laugh.gif


Bryan

[/ QUOTE ]

[DIRTYT]

lol for you i would even put the back seat back in! and u can sit next to the cooler! http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif

[hotrodladycrusr]

Thanks for the offer Bryan, appreciate it but I've got everything covered. Roadstar and my good buddy Scott will both be here early to help set up tables, chairs, music, etc. Atch and his girl will also be here early to help with any last minute prep stuff. You just work on your ride so we can all check it out in person!

[RileyRacing]

I'd love to help but I don't get home til 6 as it is, by the time I'd make it to your pad, it'd be bedtime. http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif

Good luck, cause I wanna see that damn engine run! http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif

Jay

[DIRTYT]

thanks jay.. well looks like its me and fathack are going to get this thing going hopefully!! im bound and determend to make it damnit! would be easier if we were putting in a vega motor! http://www.jalopyjournal.com/ubbthreads/images/graemlins/shocked.gif http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif least theres not a million things to do. any one have any tips for getting the tranny to sneek back on top of the cross member. im installing the motor and trans together. but yesterday when i was trying to do it by my self i couldnt get the tranny to want to go in its home! well off to bed for the long day tommrow damn hour and a half commute to work kills ya!

Bryan

[Hot Rod To Hell]

Get it mostly in then throw a floor jack under the tranny to get it up over the X-member.

If I didn't work 2nd shift I'd come show you jokers how it's done!!! http://www.jalopyjournal.com/ubbthreads/images/graemlins/blush.gif http://www.jalopyjournal.com/ubbthreads/images/graemlins/wink.gif

[DIRTYT]

yea i was going to do that but then i relized the onley floor jack i have was holding the car up cause its to damn low for the hoist to fit under it! http://www.jalopyjournal.com/ubbthreads/images/graemlins/smirk.gif http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif

[Hot Rod To Hell]

Can you put some boards or something under the front wheels and swipe the jack for trans duty???

[DIRTYT]

yea i have some bell housings i think i may put under them. seem to be the right size for the job. if not im prob going to bring some jack stands tommrow. its fun doing this in my parking lot!

[Fat Hack]

Uhhh...I get all the TOPSIDE work there, Bro! http://www.jalopyjournal.com/ubbthreads/images/graemlins/crazy.gif http://www.jalopyjournal.com/ubbthreads/images/graemlins/tongue.gif http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif