Sawsall
05-23-2004, 10:54 PM
Haven't any digital pics of cars I did in my past...
But here's recent stuff:
Go to the photo albums if you want to see the complete builds...
My cheapy website (http://home.bellsouth.net/personalpages/scripts/community.dll?ep=16&ext=1&groupid=3192&ck=&ver=3.0 )
My triumph, Started with just the front frame hoop and engine that needed rebuilt. A free front-end and wheels of a Yamaha and other free rusty parts:
http://216.77.188.54/coDataImages/p/Groups/3/3192/folders/1051/15383Image001.jpg
Might make an oil tank like this???
http://216.77.188.54/coDataImages/p/Groups/3/3192/folders/1051/47254ironcrosstank02.JPG
Sure, why not?
http://216.77.188.54/coDataImages/p/Groups/3/3192/folders/1051/116183finalmock-upoiltankseat.JPG
It won first place brit chop a couple years at The Horse, Back Street Choppers' Smoke out in Salisbury NC.
http://216.77.188.54/coDataImages/p/Groups/3/3192/folders/20431/154794ondisplay.JPG http://216.77.188.54/coDataImages/p/Groups/3/3192/folders/20431/154797OnDisplay2.JPG
On to the most recent build:
Honda CB 750 automatic... Named "Chop-O-Matic"
Built completely from scratch on the back porch, in the dining room and then the shed once it was built...
After I bent some tubes:
http://216.77.188.54/coDataImages/p/Groups/3/3192/folders/67953/435325FramePieces.jpg
In the Dining room:
http://216.77.188.54/coDataImages/p/Groups/3/3192/folders/67953/456826Frameside.jpg
Big part of the frame done:
http://216.77.188.54/coDataImages/p/Groups/3/3192/folders/67953/507989rollingside.jpg
Stainless steel diamond plate seat and batery box:
http://216.77.188.54/coDataImages/p/Groups/3/3192/folders/135744/950032Image010.jpg
Rattle canned base coat:
http://216.77.188.54/coDataImages/p/Groups/3/3192/folders/135744/1033612tankbasecoat1.jpg
Blue over silver:
http://216.77.188.54/coDataImages/p/Groups/3/3192/folders/146906/1044732DonePaintRightSide2.jpg
Stainless exhaust
http://216.77.188.54/coDataImages/p/Groups/3/3192/folders/146906/1044790DoneExhaust2.jpg
http://216.77.188.54/coDataImages/p/Groups/3/3192/folders/146906/1044793DoneExhaust3.jpg
Olds hood ornament for a gas cap
http://216.77.188.54/coDataImages/p/Groups/3/3192/folders/146906/1044796DoneGasCap.jpg
Rolled stainless diamond plate for grips
http://216.77.188.54/coDataImages/p/Groups/3/3192/folders/146906/1044807DoneMirror.jpg
Caddy taillite
http://216.77.188.54/coDataImages/p/Groups/3/3192/folders/146906/1044817DoneRearDownLow.jpg
http://216.77.188.54/coDataImages/p/Groups/3/3192/folders/146906/1044834Donetaillight.jpg
http://216.77.188.54/coDataImages/p/Groups/3/3192/folders/146906/1044841DoneLeftFront.jpg
http://216.77.188.54/coDataImages/p/Groups/3/3192/folders/146906/1044843DoneLeftlowdown.jpg
http://216.77.188.54/coDataImages/p/Groups/3/3192/folders/146906/1044844DoneLeftRear.jpg
http://216.77.188.54/coDataImages/p/Groups/3/3192/folders/146906/1044849DoneRear.jpg
http://216.77.188.54/coDataImages/p/Groups/3/3192/folders/146906/1044850DoneRightside.jpg
All the above and more is why and how I got named Sawsall... The best choppa motor is free and runs... don't matter the make, model or size... I'll cut them all...
Hope you enjoy the pictures...
someday, I'll do a couple 4 wheel choppas.
But here's recent stuff:
Go to the photo albums if you want to see the complete builds...
My cheapy website (http://home.bellsouth.net/personalpages/scripts/community.dll?ep=16&ext=1&groupid=3192&ck=&ver=3.0 )
My triumph, Started with just the front frame hoop and engine that needed rebuilt. A free front-end and wheels of a Yamaha and other free rusty parts:
http://216.77.188.54/coDataImages/p/Groups/3/3192/folders/1051/15383Image001.jpg
Might make an oil tank like this???
http://216.77.188.54/coDataImages/p/Groups/3/3192/folders/1051/47254ironcrosstank02.JPG
Sure, why not?
http://216.77.188.54/coDataImages/p/Groups/3/3192/folders/1051/116183finalmock-upoiltankseat.JPG
It won first place brit chop a couple years at The Horse, Back Street Choppers' Smoke out in Salisbury NC.
http://216.77.188.54/coDataImages/p/Groups/3/3192/folders/20431/154794ondisplay.JPG http://216.77.188.54/coDataImages/p/Groups/3/3192/folders/20431/154797OnDisplay2.JPG
On to the most recent build:
Honda CB 750 automatic... Named "Chop-O-Matic"
Built completely from scratch on the back porch, in the dining room and then the shed once it was built...
After I bent some tubes:
http://216.77.188.54/coDataImages/p/Groups/3/3192/folders/67953/435325FramePieces.jpg
In the Dining room:
http://216.77.188.54/coDataImages/p/Groups/3/3192/folders/67953/456826Frameside.jpg
Big part of the frame done:
http://216.77.188.54/coDataImages/p/Groups/3/3192/folders/67953/507989rollingside.jpg
Stainless steel diamond plate seat and batery box:
http://216.77.188.54/coDataImages/p/Groups/3/3192/folders/135744/950032Image010.jpg
Rattle canned base coat:
http://216.77.188.54/coDataImages/p/Groups/3/3192/folders/135744/1033612tankbasecoat1.jpg
Blue over silver:
http://216.77.188.54/coDataImages/p/Groups/3/3192/folders/146906/1044732DonePaintRightSide2.jpg
Stainless exhaust
http://216.77.188.54/coDataImages/p/Groups/3/3192/folders/146906/1044790DoneExhaust2.jpg
http://216.77.188.54/coDataImages/p/Groups/3/3192/folders/146906/1044793DoneExhaust3.jpg
Olds hood ornament for a gas cap
http://216.77.188.54/coDataImages/p/Groups/3/3192/folders/146906/1044796DoneGasCap.jpg
Rolled stainless diamond plate for grips
http://216.77.188.54/coDataImages/p/Groups/3/3192/folders/146906/1044807DoneMirror.jpg
Caddy taillite
http://216.77.188.54/coDataImages/p/Groups/3/3192/folders/146906/1044817DoneRearDownLow.jpg
http://216.77.188.54/coDataImages/p/Groups/3/3192/folders/146906/1044834Donetaillight.jpg
http://216.77.188.54/coDataImages/p/Groups/3/3192/folders/146906/1044841DoneLeftFront.jpg
http://216.77.188.54/coDataImages/p/Groups/3/3192/folders/146906/1044843DoneLeftlowdown.jpg
http://216.77.188.54/coDataImages/p/Groups/3/3192/folders/146906/1044844DoneLeftRear.jpg
http://216.77.188.54/coDataImages/p/Groups/3/3192/folders/146906/1044849DoneRear.jpg
http://216.77.188.54/coDataImages/p/Groups/3/3192/folders/146906/1044850DoneRightside.jpg
All the above and more is why and how I got named Sawsall... The best choppa motor is free and runs... don't matter the make, model or size... I'll cut them all...
Hope you enjoy the pictures...
someday, I'll do a couple 4 wheel choppas.