Panel trucks/suburbans/deliverys/vans/ what have you got ?

[55olds88]

O.K. I'm figuring with all the wares I haul about in the Olds currently that one day I'm going to have to part with some $$ to buy something with a bit more space....... so I was wondering anyone in the same situation what do you use ? got any pics ?? I know Barnett has a van and Sam has an old Panel from the speedshop, what else are folks using ? I'm leaning towards a late 50's early 60's Chev/GMC Panel but in reality I may not have the spare $ for something like that.
Show me some pics.

[PEDDRO]

How 'bout this? Although you'll have to send it to me eventually. http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif

[PEDDRO]

And it's for sale too!!!

[atch]

55,

you've been on here longer than i have so i'm sure you've seen clarence ('48 ford) before. sorry if this bores you.

[gregg]

There's ours in that little pic.

[AKATIREGUY]

YOU SHOULD CHECK OUT SOME WAGONS . . . YOU CAN PICK SOME UP FOR A LOT LESS CASH THAN A PANEL..

http://img70.photobucket.com/albums/v214/AKATIREGUY/CARS/57_Pontiac_Starchief_wagon.jpg

[55olds88]

Sweet,
Wagons are cool too, specially the 2dr variety, the 58 Peddro is next too was too much $$ might keep my eyes open for an early Holden one locally either that or get into the A R/PU (o.k. so it would carry less then the trunk of the Olds......).

[tredboy]

not really trad, but this was my daily for years. shaved, notched, airbagged astro. i used to get some of the strangest looks when i drove around and dumped just the rear or just one side http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif





tred.

[Flipper]

Space? You want space? I got SPACE!

(that's a 20 ft trailer http://www.jalopyjournal.com/ubbthreads/images/graemlins/shocked.gif)

[macs55]

Here's a pic of mine. Hope this works.http://photo.starblvd.net/keahi73/1-2-3.jpg

[lowmaster]

Here's one Fer ya! The orange 36 chevy is my dad's truck. this pic was taken in 1975. This truck sits in his garage with the same paint and everything the way he built it in 1974!!!! NOT for sale though.

[fordnutz]

My 57 Canadian Pontiac sedan delivery. Hope to start on it next winter. Nutz.

[mr57]

My 56 Canadian Pontiac sedan delivery. 350, th350 w/manual shift body, 57 posi rear end. I just located rust free front fenders for it, and am going next week to pick up a straight liftgate for it. This is my longterm project (9 years and counting), and will be done as soon as my other car is back on the road.

[TooMany2count]

http://bh2.htc.net/~clssy56/Joe/shop-left-side.jpg


this is what mine (this is a twin & not mine)looked like before i slammed it, its been lowered 20 inches in the rear (its now 12inch off the ground) & about 25 inches in the front(its about 8inches off the ground) and thats w/o the floor & motor & tranny in it. hopefully sometime this summer it will awaken form its 33yr sleep.........joe

[Satinblack]

Heres mine

[tinyelvis]

How about one of these, kinda like mine! Anyway.. vintage look.. old technology.. cheap parts that are easy to find.. good trucks!! I love mine.

[SpeedRacer2002]

Well here is what is left of mine... it will be back together soon i hope...

[SpeedRacer2002]

[Satinblack]

Crap, when did that happen!

[JamesG]

Bummer Speedracer!, Heres mine...... and one of yours I think....

http://www.carnut.com/show/02/ggkc/ggkc266.jpg

[SpeedRacer2002]

yep thats my baby right before the big ass tree....

[SpeedRacer2002]

and those are my parts cars above...

[OldSub]

This is what I drive. I'd like to say its improved a lot since that was taken, but it hasn't and I won't lie to you.
http://www.oldsub.com/images/2003/01/IMAGE056.jpg
And this is the parts car. Its no longer on the trailer, but also hasn't changed...
http://www.oldsub.com/images/2004/04/IMAGE019.jpg

[Rocky]

The past............

[Rocky]

The present...85 GMC Safari with 350/350

[55olds88]

Cool,
Thanks for the pics guys, I hear there is a Wagon of my Old holden around ( imagine 7/8 scale 57 Chev/Ponti) might be worth looking for...

[skyspop]

heres a 48 sedan delivery someone gave me,and my friends 59 nomad wagon,wish I could get it off him,but he wont budge,348,air solid car.I will be trading him the 48 and some cash for his 59 two door hardtop,just took these photos today...

[skyspop]

nomad

[Trucked Up]

Here is a couple of my panels. Working on a suburban at the moment and hope to have some photos soon.............:)

[Trucked Up]

I'll try it again..............

[dabirdguy]

I'm starting with this:
http://www.glennsplace.com/images/55_mer1.jpg

And trying to turn it into this:
http://www.glennsplace.com/images/merc_take_3.jpg

Right now it looks like this:
http://www.glennsplace.com/images/DSC04783.JPG

Rebuilding the floors has been harder than I thought. The rockers were completely gone so the whole side has to be redone.
One of he guys in hte club said "Knitting a car is hard.". I agree.

[1oldtimer]

my daily driver/hauler........230 6cyl, 3 spd o/d manual on the tree and it can haul a washer and drier upright (with room to spare). was looking for a 40's/50's panel but couldn't find one in my price range that didn't need MAJOR work.

[1950ChevySuburban]

It's not too hard to figure out what we have!:D

[Chris Casny]

Here is my 52 Ford Panel, I use it as a shop truck, it's got tons of room in it.
I can even fit 4x8 sheets of plywood in it and still close the back doors.
Also ideal for camping.
OOPS, sorry it's not a Chevy.
http://i56.photobucket.com/albums/g170/dreadman666/IMG_2051.jpghttp://i56.photobucket.com/albums/g170/dreadman666/IMG_2049.jpg

[sawzall]

the only photo I have of my fathers 40 chevy delivery.. which he has owned since 1974?
its been off the road since 1999 or so.. I am hoping to talk him into less 80's wheels next time..




http://images109.fotki.com/v794/photos/2/206474/4572338/Dadsfront-vi.jpg

[Grumpy]

HAHA...This thread is 3 years old.

But, since ya asked...My Blurb:D

[JSBriggs]

Ive got this one. Currently waiting to have theframe sand blasted.

http://www.jalopyjournal.com/forum/attachment.php?attachmentid=293895&d=1175449814

http://www.jalopyjournal.com/forum/showthread.php?t=172708

-Jeff

[kustoms2]

Here is my daily driver.

[El-Cid]

Well, I know it's a little new for this board, but here's my '71 Chevy Suburban (h)ambulance. It's a strong runner with a 350/TH350/posi combo.

[clean cut creations]

http://www.cleancutcreations.com/_images//ss6.jpg
http://www.cleancutcreations.com/_images//ssint9jz.jpg
Click here for build pics:http://www.cleancutcreations.com/snowsleadpics.html (http://www.cleancutcreations.com/snowsleadpics.html)

[clean cut creations]

http://www.cleancutcreations.com/_images//mp68jl.jpg
This is one that we finished for a customer recently. He wanted a new twist on the look of the original hotwheels supervan.
http://www.cleancutcreations.com/_images//mp23jl.jpg
Click here for build pics: http://www.cleancutcreations.com/mpgmcvan.html (http://www.cleancutcreations.com/mpgmcvan.html)

[clean cut creations]

http://www.cleancutcreations.com/_images//ch61jl.jpg
'66 chevelle wagon recently repainted by us for Chuck Hanson of "HOT ROD TV" The wagon is formerly a 4 door turned 2 door by it's previous owner. Click here for more pics: http://www.cleancutcreations.com/chchevelle.html (http://www.cleancutcreations.com/chchevelle.html)

[clean cut creations]

http://www.cleancutcreations.com/_images//bread-sled-21.jpg
"THE BREAD SLED" is a '64 chevy panel van built by us for a customer a few years ago. I hear that it has been recently sold and now lives in Switzerland.
Click here for build pics: http://www.cleancutcreations.com/gallery1.html (http://www.cleancutcreations.com/gallery1.html)

[Ned_Gob]

http://i210.photobucket.com/albums/bb256/Ned_Gob//new/everything734-1.jpg http://i210.photobucket.com/albums/bb256/Ned_Gob//new/th_everything734.jpg

[Ned_Gob]

65 Chev. panel ran 350 / 400 with duel quad offy ,sold it in /97 .
1965 Dodge A100 van is my daily driver , slant six ,three in the tree lowerehttp://i210.photobucket.com/albums/bb256/Ned_Gob/1xxxxx.jpgd , fun to drhttp://i210.photobucket.com/albums/bb256/Ned_Gob/th_1xxx.jpgive !http://i210.photobucket.com/albums/bb256/Ned_Gob/1xxxx.jpg

[Binga]

Mine that I hope to finish one day.

[Ned_Gob]

That Icecream Truck is SWEEEEEEEEEEEEET !!!!!!!!!!!!!!!!!!!!!!

[48thames]

Here is my panel. Can't put much in it, but it will get you there fast enough.
http://img.photobucket.com/albums/v403/thames1948/6-1-2.jpg
http://img.photobucket.com/albums/v403/thames1948/thames.jpg

[killer-D]

Here is the old 58 chevrolet sedan delivery I don't have anymore.Why did I sell it???

The other is my work car a 06 hhr.

[clemdaddy]

here's my 65 daily. hauls all i need. pulls strong. rides like a caddy. parts are cheap and plentiful.

[mad-cad]

Here's my 57 burb,not much to look at right now.Plan to go with a cummins 6bt turbo diesel /allison tranny.lowered with bags :D

[NONAME]

1949 UPS truck all aluminum body on a 100 inch wheel base has a 401 buick nail head. cute little bugger. I was going to build it for a swap meet/ work truck. gave it to a young guy over a year ago and it's still here

[NONAME]

here's a 43 year younger me and my 46 sedan delivery ran a flat motor with a 39 trans with 26 tooth zeypher gears. around 1964

[Brad54]

1949 UPS truck all aluminum body on a 100 inch wheel base has a 401 buick nail head. cute little bugger. I was going to build it for a swap meet/ work truck. gave it to a young guy over a year ago and it's still here

If that's a legit UPS truck, it's very, very rare: they have always had a policy of crushing their retired vehicles, so no other companies could buy them and confuse customers.

Very, very cool truck. I always thought a truck like that would make a great swap meet wagon/out of town camper type deal.

-Brad

[macs55]

Here's a pic of our little ride after the tree fell on it

http://i61.photobucket.com/albums/h56/ragdollcustoms/IMG_0188.jpg
http://i61.photobucket.com/albums/h56/ragdollcustoms/IMG_0189.jpg

[jaco]

Here's my project
48 Dodge
40 ford windshield
smoothed frontend
hope to finish soon.
http://i139.photobucket.com/albums/q302/harleydodge1/stuff060.jpg
http://i139.photobucket.com/albums/q302/harleydodge1/stuff063.jpg

[ItalianStallion]

I love the vans. I'm working on a van project right now. Something a little newer though. I'll have pictures up when she is finished. Definitely going to be "something else"

[NONAME]

If that's a legit UPS truck, it's very, very rare: they have always had a policy of crushing their retired vehicles, so no other companies could buy them and confuse customers.

Very, very cool truck. I always thought a truck like that would make a great swap meet wagon/out of town camper type deal.

-Brad
it still has the UPS brown paint and gold leaf pin stripes. The person I talked to about it said "he didn't know how it got out of the system but that body was used from 49-54. has skylights and a low entry step and wide door in the rear (half the width of the truck)
The youngster I gave it to. plans on a new chassis running a rebuilt 5 cylinder mercedes engine and trans that he has. he also wants to polish the whole truck like an Airstream trailer. that's what dreams are for

[Trucked Up]

This will be my next project after the 'Burb is finished...........:)

[Rad Rob]

'53 Pontiac delivery
http://a646.ac-images.myspacecdn.com/images01/110/l_1e2b44e46c0b268dd3fa975619a0e63d.jpg

[roadkillontheweb]

http://www.roadkillontheweb.com/images/panel1.jpg

[kaydub]

My dad's all original 34' Ford Delivery that he has had 30+ years. sitting on a early Pete Eastwood chasis that he built for himself back when he was working out behind Pete & Jake's in Temple City. The Wheels are one of the first sets of Halibrand Style Wheels Eric Vaughn did when he was about to start "Real Wheels"..

http://i17.photobucket.com/albums/b68/kaydub03/image0-13.jpg

[HemiDave]

A secret that needs to be in a museum.

Dave

[Roadsters.com]

http://www.roadsters.com/56_bare_770x578.jpg

Here's my '56 Ford panel truck in bare metal. I always thought they were bitchin' trucks, and last fall, when I found one that was straight and rust-free, I grabbed it.

Here's a page about it: http://www.roadsters.com/56/

Dave
http://www.roadsters.com/

[clean cut creations]

This will be my next project after the 'Burb is finished...........:)
http://www.jalopyjournal.com/forum/attachment.php?attachmentid=329268&d=1183733744
What are your plans for this truck? Are you gonna cut it up? It looks like someone has already gotten their chance to restore it. Nice start to a project.

[IceBox]

Heres my dads project ..

[JokerJ]

Here's mine, Titled as a 1960 I-H Metro A-150 (but it looks like a `57 from my research, can anybody verify?), I'm seriously considering a dodge 1 ton turbo diesel chassis transplant. I hope the picture comes through.

Edit: my pictures are too big and this computer (my wife's) doesn't have software to do it. If anybody can resize and post if I send them via email, I would appreciate it.

[thamesvan]

[quote=48thames;2075422]Here is my panel. Can't put much in it, but it will get you there fast enough.
Bitchin'.....fine example:p

[patrick66]

I have started a group for Panels and Vans on the HAMB here:

http://www.jalopyjournal.com/forum/g...#gmessage31165 (http://www.jalopyjournal.com/forum/group.php?groupid=239&gmid=31165#gmessage31165)

I've noticed some interest in these, along with the van pickups (Econoline, A100, Corvair), so here it goes. Closest thing I found that already existed was the Longroofs group. Sedan deliveries are welcome, too!:D

Yeah, so I've revived a two-year-old thread!

[65PANELRAT]

Sixty Five Panel / Carryall!

[lowrodz68]

here are 2 i'm working on

[MedicCustoms]

1958 delray going to start soon I hope what do think

[patrick66]

My in-process '65 C-10 panel. Probably end up with a 350/700R4 just to get it going. Won't be anything fancier than a driver/parts chaser, complete with "patina".

http://inlinethumb08.webshots.com/12999/2018654740073075023S600x600Q85.jpg (http://rides.webshots.com/photo/2018654740073075023tTHegh)

[Mikey's Pinstriping]

Just a few from my past and present. The 92 Buick delivery is for sale or trade. Looking for a Chevy Short Van or Panel truck.

Mikey
www.MikeysPinstriping.com (http://www.MikeysPinstriping.com)

[APACHERACING]

1958 Suburban, now with a chrome front end, 454, 700R4, 9 inch rear end. http://i132.photobucket.com/albums/q10/race59apache/drg024.jpg Its main purpose is to make sure this gets to the track,,,,http://i132.photobucket.com/albums/q10/race59apache/A1ATHPT-1.jpg

[Kewl Bus]

Can I join, Can I Can I?

[1oldtimer]

my daily driver/hauler........230 6cyl, 3 spd o/d manual on the tree and it can haul a washer and drier upright (with room to spare). was looking for a 40's/50's panel but couldn't find one in my price range that didn't need MAJOR work.

another one i just got, it's a '54 with a '55 grill. when i get it road worthy my '64 is going up for sale.

[oilslinger53]

<---- in the proccess of resurrection. actually re-resurrection...

[JohnThomas Sorrels]

Here's part of a mid 30's panel I wish was mine...

http://img207.imageshack.us/img207/3704/img0178zt7.jpg

[oilslinger53]

http://www.cleancutcreations.com/_images//bread-sled-21.jpg
"THE BREAD SLED" is a '64 chevy panel van built by us for a customer a few years ago. I hear that it has been recently sold and now lives in Switzerland.
Click here for build pics: http://www.cleancutcreations.com/gallery1.html (http://www.cleancutcreations.com/gallery1.html)
this has to be the coolest scion i've ever seen!

[oilslinger53]

Here's part of a mid 30's panel I wish was mine...

http://img207.imageshack.us/img207/3704/img0178zt7.jpg
something must be done about this... That should not be a trailer.

[JohnThomas Sorrels]

something must be done about this... That should not be a trailer.

Tell me about it, I've fantasized about building a "replacement" trailer and swapping them out at night.

[mahalo51]

O.K. I'm figuring with all the wares I haul about in the Olds currently that one day I'm going to have to part with some $$ to buy something with a bit more space....... so I was wondering anyone in the same situation what do you use ? got any pics ?? I know Barnett has a van and Sam has an old Panel from the speedshop, what else are folks using ? I'm leaning towards a late 50's early 60's Chev/GMC Panel but in reality I may not have the spare $ for something like that.
Show me some pics.

Hi I'm a new member I currently have a 1956 chevy suburban that I bought in AZ and is a new/old project car..

[eye bone]

Just a few from my past and present. The 92 Buick delivery is for sale or trade. Looking for a Chevy Short Van or Panel truck.

Mikey
www.MikeysPinstriping.com (http://www.MikeysPinstriping.com)

Hey Mikey, what is the one in grey primer a 38 or 39?

For a sedan delivery that's my style right there! (or a 40 ford, or Willys… or a…) LOL

[dvs]

http://i44.tinypic.com/x3thdf.jpg
I used to have one of these painted exactly the same way, always thought it would look great chopped.
http://i44.tinypic.com/2zr2k55.jpg
I used to haul a lot of supplies in it.

[oddrodgarage]

Here's my 54 dodge panel sportin' a flathead with twin carbs, split exhaust with functioning lakepipes...drive it just about every day

[JMPRO]

My all time favorite. I would buy this one in a heart beat if I could find out who owns it. Does any one know what wheels and caps theses are? I thought 37's had a solid top, this one appears to have an insert. Any thoughts.
http://i6.photobucket.com/albums/y232/JMPRO/ruraldl2.jpg

[D.R.Smith]

This is what I use for my everyday driver.

[screwball]

the trailer is a 33 chev I think.

[Rad Rob]

Here's my '53 Pontiac, I don't remember if I replied to this thread yet. :o
I still can't decide if I want to make a gasser or a custom out of it....

http://i179.photobucket.com/albums/w291/RadRobert/HOME7-1-07.jpg

http://i179.photobucket.com/albums/w291/RadRobert/FrontGarage.jpg

http://i179.photobucket.com/albums/w291/RadRobert/Rear.jpg

[fiat gasser]

This is my 1936 Fiat/Simca Sedan Delivery. Not much for room, Just enough for a picnic basket and a six pack.:)

[Mikey's Pinstriping]

EyeBone, it's a 38 Chev. Bought it from a guy who was 90 yrs old, came to Tex from Cali in the 60's with the car. Had an old SCTA sticker on the window when I got it. He told me some cool stories about the good old SCTA days when he was doing that thing we all wished we could have been a part of. I took out the glass and saved it.

Mikey
www.MikeysPinstriping.com (http://www.MikeysPinstriping.com)
"I Do Bad Things To Good Cars"

[28 chevy]

Here's my 2 cents, I mean 25 grand!
and the current project
Jim

[VNCduke]

mine. yeah its not HAMB freindly i know

http://i123.photobucket.com/albums/o288/gasser52/burb2.jpg

[Rich Venza]

Glad to see this thread come back to life. I've been a truck guy for most of my hot rod life. These have come and gone through the garage...I can't seem to keep anything for long.
The Suburban was too nice to use as a tow truck for the Comp Coupe.
The 1941 Chevy COE Panel is a one off that Coker Tire thought they needed.
The 1927 Hudson Hearse was converted to a 7 Pass limo.
'37 Ford Box Van was used to haul fiberglass to Swap Meets.
'52 Courier had a 289 and went to a fellow in Chicago.
'60 VW Kombi was an every day driver in PA.
'38 Ford REA delivery van was very rusty and wound up being junked.
'46 Chevy SD had a small block and was sold to a gal in Ohio.
'57 Chevy Step Van was going to be used for Swap Meets, but was sold to a guy who exported it to Puerto Rico to be used by a remote Fire Brigade.
'42 Fiat Furgone sedan delivery was the second body out of the mold. As bob said, not much room for hauling. Now lives in Ill.

[oddrodgarage]

Rich that cabover panel is awesome! Nice collection of trucks that you've had

[Michigan Rick]

I've owned my baby since 1980...

Still lots of fun.

Michigan Rick

[carcruse]

My brother sold his a few years ago and now wishes he hadn't.

[chevyshubox]

This is my latest project 56 sedan delivery
http://i40.tinypic.com/125onb9.jpg

[norby48]

ALL original 283-granny gear 4spd.
Was a hippie bed room on a commune in Utah until 1989. My friend put a battery and clutch in it and drove it home to Chicago. Still had Purple velour walls when I got it.
I used it as a work truck (electrician) for 3 yrs. Traded it off.

[eye bone]

EyeBone, it's a 38 Chev. Bought it from a guy who was 90 yrs old, came to Tex from Cali in the 60's with the car. Had an old SCTA sticker on the window when I got it. He told me some cool stories about the good old SCTA days when he was doing that thing we all wished we could have been a part of. I took out the glass and saved it.

Mikey
www.MikeysPinstriping.com (http://www.MikeysPinstriping.com)
"I Do Bad Things To Good Cars"

Hey Mikey, Thanks for the info!

Ya man wouldn't that have been cool to be kickin' around with those guy's back then. But you got to meat him & hear his stories.

[moparron426]

I have had a few over the years, I gravitate towards commercial vehicles.
I have 4 COE projects right now and a 47 dodge panel truck

I had a 36 dodge humpback panel
a 48 morris van
a Thames panel(fiberglass)
and a 33 willys panal(fiberglass)

man I wish I still had them all,,,,,,,,


http://img150.imageshack.us/img150/9426/145012429vinmpnphly3.jpg


http://img12.imageshack.us/img12/3289/427750273fznllephme6.jpg

http://img18.imageshack.us/img18/5433/2383744720044359335yghlji4.jpg


http://img519.imageshack.us/img519/472/kkthames003ka0.jpg


and this car hauler was built from a 34 humpback panel truck

http://img4.imageshack.us/img4/4189/2613500090044359335tdbofi4.jpg

[53hauler]

been fooling around with this one for awhilehttp://i150.photobucket.com/albums/s107/33delivery/DSC_6310.jpg
http://i150.photobucket.com/albums/s107/33delivery/DSC_3949.jpg

[patrick66]

I have started a group for Panels and Vans on the HAMB here:

http://www.jalopyjournal.com/forum/g...#gmessage31165 (http://www.jalopyjournal.com/forum/group.php?groupid=239&gmid=31165#gmessage31165)

[nitrohonkey]

Here is my van and the 60 burb I just sold. Van is getting a totally straight axle and I plan to set the engine back 2 feet. GASSER!

[ardunpinto]

Im curently working on a 1951 mercury panel. Ihave a 51 ford pu that is getting plucked for the panel body. ashamed of how it looks now because i took it down to bare metal and preped it but its alredy turned red . I own a upholstery shop and needed something that when i picked up seats or a headliner i could keep them from blowing out. plus theres plenty of room for some neat logos It also is great for kids, i took a seat out of a mini van also the floor latch system, they had belts made n and you can easly pop it out for those large loads. I like all old panels and for some reason the new hhr's are growing on me. keep your eyes peeled the 50's ford panels they are usually fair priced and parts are pretty easy to find. great pics everyone makes me want to get mine on the road.

[Patrick46]

Hey...I got one too!!
1950 Chevy panel...

Wanna buy it??? :ohttp://a417.ac-images.myspacecdn.com/images01/120/l_a22b2909cb780e0503586f20c1c9ccf0.jpg (http://viewmorepics.myspace.com/index.cfm?fuseaction=viewImage&friendID=79534482&albumID=1518257&imageID=17934707#a=1518257&i=20376149)

[Persa]

Me and my girlfriend owns a 1952 Volvo paneltruck that started it's life as an ambulance. Maybe not HAMB material but i think it's pretty cool.
It's sporting an inline six flathead and a three on the tree.

[51 woody]

did you get tree?

[55 dude]

Me and my girlfriend owns a 1952 Volvo paneltruck that started it's life as an ambulance. Maybe not HAMB material but i think it's pretty cool.
It's sporting an inline six flathead and a three on the tree.that volvo rocks!:D keep posting on you progress.

[Choptop]

http://www.billetproof.com/images/alanpics/panelwithbigreartires.jpg

[Hip]

Here was my '59 i got rid of to get the '41 Buick, and the '54 panel before Satinblack traded me for it.
http://img.photobucket.com/albums/v639/fleetrodn59/PANELS/Picture022.jpg
http://img.photobucket.com/albums/v639/fleetrodn59/marks%20truck/MAX2868.jpg

[Satinblack]

Let me correct my friend Hip before this thread gets out of hand. The panel was a 53, last year of the two piece windshield. It now resides with a lurked over in England. I remember when I first got it. We had to drag the body onto a trailer, because it was tore down to nothing. Bare frame, bare body.......

[daddybigfiyah]

http://i42.tinypic.com/290uhac.jpg

[daddybigfiyah]

heres my 63 postal jeepfleetvanshttp://i40.tinypic.com/29c1d87.jpg

[Pauly da mick]

Did Willys make those? their cool!:cool:

[kwmpa]

Here is my 50 burban waiting for paint.
http://i124.photobucket.com/albums/p6/choptopmafia/kevin048.jpg
http://i124.photobucket.com/albums/p6/choptopmafia/kevin049.jpg
http://i124.photobucket.com/albums/p6/choptopmafia/kevin050.jpg
And my 50 3800 Deluxe panel....335 original miles(lowest milage AD truck in the world)
http://i124.photobucket.com/albums/p6/choptopmafia/IMG_0651.jpg
http://i124.photobucket.com/albums/p6/choptopmafia/IMG_0652.jpg
http://i124.photobucket.com/albums/p6/choptopmafia/IMG_0654.jpg
http://i124.photobucket.com/albums/p6/choptopmafia/IMG_0655.jpg
http://i124.photobucket.com/albums/p6/choptopmafia/IMG_0656.jpg
http://i124.photobucket.com/albums/p6/choptopmafia/IMG_0657.jpg

[LiveWire64]

Well, I have lots of stuff to drive. Here's my 72 Chevy van. Just put a 454 in it last year. And a pic of my 64 Chevy van I just picked up. The 64 was in the movie "The Best of Times" Kurt Russell drove it. Brad

http://images44.fotki.com/v1487/photos/4/41638/1895534/41109057-vi.jpghttp://images15.fotki.com/v234/photos/8/41638/7203057/Reno011-vi.jpg

[maniac]

Here's my 38 sedan delivery, had it since 1983, been on the road since 89 or so, still not finished.

350, TH 400,

http://img.photobucket.com/albums/v226/swleasinginc/004.jpghttp://img.photobucket.com/albums/v226/swleasinginc/38chevy001jpeg.jpg

[Undercover Customs]

Here's our newly acquired 62 Boyertown Bread Van. It's got a strong running propane Ford 6 in it. Picture is not that great, it was snowing when I took it.

[randingo8]

Love them Panels, here a a few pics of my 1938 Dodge Humpback.

http://pic20.picturetrail.com:80/VOL1581/7918390/22191322/367541998.jpg

http://pic20.picturetrail.com:80/VOL1581/7918390/22191322/367542007.jpg

http://pic20.picturetrail.com:80/VOL1581/7918390/22191322/367542001.jpg

http://pic20.picturetrail.com:80/VOL1581/7918390/22191322/367542025.jpg

See Ya!
Randy

[mahalo51]

I've got a 56 Chevy Suburban for sale...

[thenees]

1965 Chevrolet Suburban. Bought it in the UK, drove it home to The Netherlands.
Did a round trip to Schotland in it to pick up a Chrysler 440 engine for a friend.
http://i958.photobucket.com/albums/ae68/hotrodharbor/Suburban_006.jpg

[butcherted]

<meta http-equiv="Content-Type" content="text/html; charset=utf-8"><meta name="ProgId" content="Word.Document"><meta name="Generator" content="Microsoft Word 9"><meta name="Originator" content="Microsoft Word 9"><link rel="File-List" href="file:///C:/DOCUME%7E1/Ted/LOCALS%7E1/Temp/msoclip1/01/clip_filelist.xml"><!--[if gte mso 9]><xml> <w:WordDocument> <w:View>Normal</w:View> <w:Zoom>0</w:Zoom> <w:DoNotOptimizeForBrowser/> </w:WordDocument> </xml><![endif]--><style> <!-- /* Style Definitions */ p.MsoNormal, li.MsoNormal, div.MsoNormal {mso-style-parent:""; margin:0in; margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:"Times New Roman"; mso-fareast-font-family:"Times New Roman";} @page Section1 {size:8.5in 11.0in; margin:1.0in 1.25in 1.0in 1.25in; mso-header-margin:.5in; mso-footer-margin:.5in; mso-paper-source:0;} div.Section1 {page:Section1;} --> </style>Well here is another one for the mix it 50 GMC Suburban.

[hdman6465]

Here are mine. Both used almost daily

[SHORTDOG]

Calling all Burbs! Calling all Burbs! We want to see more Burbs!

[oldsedude]

here's a couple of pics of my '67 burb,
454/ t400/ 9'' diff.
tows the race trailer around and houses the crew (kids) inside.

[Leevon]

Here are mine. Both used almost daily

Winner!

[RQuantz]

This is the best picture I have of one which sits on my friend's father's land. For the past 30 years, he's collected about 40 cars that he's "going to fix up", but I hope to get this one eventually with enough convincing that it's not worth the astronomical amount of money he thinks it's worth.

[BajaCharlie]

SUMMER MADNESS this weekend for info www.myspace.com/summer_madness (http://www.myspace.com/summer_madness) trucks and vans galore

[chopped]

In the process of a frame swap, 88 Dodge with 318 under a 62 Townwagon.

[ssaza25]

I have a 33 WillYs Sedan Delievry on going project . Steel car with a steel 33 sheet metal.

[Choptop]

http://www.billetproof.com/images/PanelStinkbugstance/panellowered.jpg

The Billetproof Mobile... 307/700R4, power steering, disc brakes, A/C. Gets 17mpg on the freeway.

[Choptop]

I also have one for sale
http://www.jalopyjournal.com/forum/showthread.php?t=494947

http://www.billetproof.com/images/alanpics/paneltruckforsalepics/SDC13148.jpg

[NONHOG]

The good side :D

[runningiron]

This is my daily driver. I was going to finish it out with a surf wagon theme but have lost interest. It's 4 sale

[John B]

One I just picked up. 468 with the factory bull dog transmission. A little too new, but I got it to trade on. Did I mention air ride as well?

http://www.youtube.com/watch?v=CWCXQ16lvuU



http://i16.photobucket.com/albums/b15/Carshowguy/Burb/S6300893.jpg

[kuztomklaus]

and mine!
http://i56.photobucket.com/albums/g195/customhotrod/Bonneville%20and%20Beyond%202010/IMG_7287.jpg
1950 Chevrolet 1 ton Panel. on it's way to Sweden in a container

[zipperhead]

1952 panel truck (former rescue FD Vehicle Town Of Ashland Ma). 239 Flattie, 4 spd, low low original miles (<20K),,,Included 60"s pic when in service...

[cllong]

Love your...Willy's? Great van.