Which wheel studs for buick drums?

[MIKE-3137]

Supposed to pick up my hubs today from the machine shop, and wondered if anyone had a part number for wheel studs that work with the 46 hub buick drum combo? My hubs had no studs, but I think they probably arent whats needed anyway. I have a napa part number (640-1070) from a magazine article but napa says the numbers are no good.
Thanks

[Fraz]

Depending on your parts shops, they might let you browse their wheel stud book and find something that'll work.

[MIKE-3137]

Thanks, Gonna try going to the Twilight Zone (autozone) this evening and see if they'll let me plunder. They can be pretty anal about part numbers though.

[36-3window]

yes,that magazine aricle had the wrong part number....i use Napa part# 641-1145 or Dorman # 610-132 when using the existing 5-1/2" pattern in the hub

[wideglide74]

I tried the napa #'s to no avail. The machinest whom did mine typically uses a diffrent stud that he shortens a little. Sorry I don't know which studs he used and I'll guarantee he won't tell me.

[Crease]

Had similar drama the other day. Call Moser engineering 260-726-6689. My application was a little more straightforward, but they were very knowledgeable.

Crease
Barons So Tex