SBC casting question

[TulsaChokehld]

Ok, I have a SCB and i am tryin to figure out what the hell the heads are. I am use to seeing the symbold on the side of the heads. The ones I have seen most are the double hump symbols. But I havent seen the symbol that are on my heads before. I do not have a picture of it, or i would post it. But i can describe it as best i can. Basicaly it looks like a M but it doesnt come down to a point in the middle, it dips.

[CURIOUS RASH]

<font color="green">GO HERE (http://www.mortec.com)
And look up the numbers on the heads, they are inside the valve cover, between the valves.

It will tell you what you want to know.

RASHY</font>

[Scotch]

Tha casting marks are one thing; casting numbers are the key. Check yours against this chart:
http://www.mortec.com/castnum.htm

It'll tell ya plenty about what you've got.

Scotch~!

[whitewallslick]

Check out Mortec (http://www.mortec.com/castnum.htm) , they have casting numbers for most sbc heads. Should give you the info you need. WWS

[whitewallslick]

Seriously, there were no responses when I posted http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif WWS

[CURIOUS RASH]

<font color="green">DAYUM!!!

Mortec is a popular place!!

RASHY </font>