The PARTS are ROLLIN IN... '29 roadster update

[Tuck]

UPS truck has stopped by a couple times... and dropped off PARTS that I traded stuff for on the hamb.

I got the '48 hubs from rocky thru some horse tradeing. Cleaned them up and mounted them on the spindles. The bearings cleaned up nice! Now for the machine work and the redrill for the right bolt pattern


38 axle/spindles, 48 hubs, 40 ford backing plates, 60 buick drums and machine work make the front end look like ART!

[Tuck]

Got this doing some horse tradeing with Creeper Larry... dude this ROCKS! Thanks! 33 commercial grill cut down and lookin sweet already...

[Tuck]

tore down the rear... im getting backing plates from EARDY who was up late one night 3AM and out in his garage trying to figure out what rear housing I had... hes got it!

Heres pics of the rear before it gets blasted
its gonna get chromed after everythings welded and fabbed up...

[Tuck]

a sneak peek at the mill before it starts getting cleaned up. im going to tear it down and clean it/paint it, new gaskets etc... I might re ring and bearing... its only got 70k on the mill.
331 hemi

[Eyeball]

Looks like you are realy gettn' your shit together........when do you plan to have it on the road?

[Tuck]

no need to reply to this... just wanted to post some updates... i dig seeing shit go together on the hamb and watch it all take form is the best part.

I'm getting scoops for the front of the backing plates from ROOTHAWG! and I got a Title from Packrat32...

I think out of everything the title is the coolest part. Thanks Tony I'll email you when the stuff is in the mail!

I posted a thread on tire sizes for 35 wires... I never even knew what those style tires came off of. NOW I do... and since I did start to build a 60's hot rod im schooling myself against running wires. I admit to "learning" alot of info building this car! I think thats the best part!

I think i'll start out with plain rims and buy some cheater slicks for the back etc untill I find the perfect set up.

I really love the radir look or old fentons or ET's. I'm leaning twards ribbed radirs fat/skinny w/ whitewall slicks.

so enough for now...
gotta run to class
thanks for everyone thats been helpin answer all my questions!!!

Tuck

[Tuck]

eyeball

IT WILL BE AT FIFTYS if I have to tow it behind the HEX
or the hamb drags,
which ever comes first!

[burndup]

damn, that thing is gonna be the shiggity shiznay...

even cooler that that other slammed kar you got that rolls on 18's! http://www.jalopyjournal.com/ubbthreads/images/graemlins/laugh.gif

[Tuck]

hey @#%$$ yer not supposed to be tellin people that I have a dark side...
Im picking up a body kit on Friday [invader] from mars...
thanks for keeping me away from the rainbow 92 version... ive already had offers on campus for the modern day deuce coupe its funny as hell...

any luck with your site? i can help on the web side and server space if ya need it...

Tuck

[Roothawg]

I hear ya biotch. http://www.jalopyjournal.com/ubbthreads/images/graemlins/cool.gif

[rickyracer1962]

where are your chrome smoothies? http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif

[Rocky]

Great! I've been staying busy on mine as well...got the backing plates from the Buick and the ford taken to work to blast the rust off'n em but the little cabinet-style blaster was taking wayyyyyyy too long. I brought 'em home and slipped them into my mollasses bath to get ultra clean for a few weeks.
Finally got the 60 pontiac posi 3rd member freed up so I can disassemble it and harvest the posi carrier from it.
Disassembled and honed the 59 Buick front wheel cylinders and gotta still get 1.25" kits tomorrow.
Brought the new clutch assy home to prepare for assembly.

[Rocky]

That clutch is a 39 LaSalle disc with a 56 Dodge pickup pressure plate. It all goes behind my 331 Chrysler hemi with the LaSalle tranny behind it. Here's where the rusty ol' backing plates live for a few weeks.....

[Tuck]

rickyracer damn u

heres a pic but they're 14's and that kinda suxx for running slicks there all in 15"

im gonna have a post with a bunch of rims for sale...
14" chrome reverse a full set
16" 35 spokes
17" chrysler rims

and then im gonna go buy some RUBBER, like invest in some 8" pie cut slicks.

Rocky yer rig is lookin good!
Its funny how this shit adds up, im trying to budget it and get by with what i can since im in school... like saving on the chrome work by doing most of the work myself... but its tough. I wish i was working 40 hr weeks and pulling in some real money.

cant believe all the time just cleaning old stuff up and tracking down parts... it CONSUMES your life.

Glad I have you guys as a resource or this dream would never happen... thanks!

I've wanted a hot rod since I was 5!

for u rickyboy...

[rickyracer1962]

your breaking the rules man. those arent smoothies. i'm gonna tell.

[Tuck]

so they're missing the CAPS....
thats all http://www.jalopyjournal.com/ubbthreads/images/graemlins/wink.gif http://www.jalopyjournal.com/ubbthreads/images/graemlins/tongue.gif http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif

keep an eye out fer some "period" MAGS
mid sixtys aiite

[tokyo]

looking nice...are you doing the work at the house? nice project i bet, fits real nice in there. i can see the blue flashes from the hobart through the dark glow of a 20 inch garage window as the mad fabricator injects hate into his love machine. ruling all, and knowing none, he strives for glory from his medium of choice!

[rickyracer1962]

any pics of the body? is it a real roadster?

[NealinCA]

[ QUOTE ]
any pics of the body? is it a real roadster?

[/ QUOTE ]

X-Coupe...

http://www.jalopyjournal.com/ubbthreads/image_uploads/149507-MVC-002S.JPG

BTW Tuck, I am glad to hear you gave up on the 35 wire deal. I like the rest of the build plan, the wires just didn't seem right. Keep the pics coming.

Neal

[Tuck]

Neal thanks man...
i just got a deal on those wires and was like sweeet

IM BACK to EARTH now...
you guys gotta keep me grounded DAMN
back to the build plan
60's / mags/ slicks/ chrome/ metal flake/
wtf was I thinking?

btw, that purple shit thats peeling off the body is old metal flake... its baked out purple boat flake. It was in the weeds and I fell in love with it as soon as I seen it.

Game on!

[Tony]

Tuck, no problem man. I'm glad you can use it!
One of these day's we gotta make it out there so you can take us for CrAzY ride's in the "HEMIfied Tuck-n-roadster"(tm)

ROCK ON BRO...and keep us posted with them pics!

Rat

[Dooley]

Tuck dibs on the rims sent ya a pm

[Rocky]

Hey Bryan.might wanna check your blood-sugar. Sounds like it's a little high.....

[AHotRod]

Metalflake RULES !

[tokyo]

hahaahaha funny man...i haven't had any coffee lately...thought tuck would like, seeing as he is HELLFIRE bound!