pushrod question

[Gasolinedeniz]

okay i ordered pushrrods for my old 53 lincoln engine and the new ones are different to the old ones "see picture"
what do you think should i use them or take them to a machine shop and regrind them till they match the old ones ??

the diference is not that huge like my pic but nearly

[ChuckleHead_Al]

Uhhh I think you posted this in the wrong forum....

[Gasolinedeniz]

why ??to engine specific ?

[Groucho]

Start over with the right ones. Don't grind anythingokay i ordered pushrrods for my old 53 lincoln engine and the new ones are different to the old ones "see picture"
what do you think should i use them or take them to a machine shop and regrind them till they match the old ones ??

the diference is not that huge like my pic but nearly

[Gasolinedeniz]

startover is expensiv in switzerland ,why not let them regrind in a machine shop ?

[Chris Casny]

I'd repost this thread in the regular section not the "introduce yourself" section, you will get alot more responces.

[THX_138]

Your question will get better response posted here... http://www.jalopyjournal.com/forum/forumdisplay.php?f=8 good luck!

[Gasolinedeniz]

okay was a misstake ,post again later