PDA

View Full Version : niagara bead roller seam former and other sheet metal tooling

sawzall
02-23-2007, 09:08 PM
OLD niagara bead roller former etc.

very good condition.. I have used this from time to time.. works fine..
http://images21.fotki.com/v515/photos/2/206474/1985653/DSC05779-vi.jpg
http://images21.fotki.com/v515/photos/2/206474/1985653/DSC05778-vi.jpg
http://images21.fotki.com/v515/photos/2/206474/1985653/DSC05780-vi.jpg

as shown here the "guide" or "fence" has been repaired by the previous owner..


http://images22.fotki.com/v518/photos/2/206474/1985653/DSC05777-vi.jpg
sawzall
02-23-2007, 09:12 PM
three sheetmetal froming hammers..
http://images21.fotki.com/v516/photos/2/206474/1985653/DSC05770-vi.jpg

12.00 - shipped

and one pexto? craftformer? stake.
http://images21.fotki.com/v578/photos/2/206474/1985653/DSC05772-vi.jpg

65.00 - shipped
tattooedup37
02-23-2007, 09:16 PM
PM sent on hammers
Rocky
02-23-2007, 09:18 PM
Sawz...check your pm's...
slamdpup
02-23-2007, 11:32 PM
OLD niagara bead roller former etc.

very good condition.. I have used this from time to time.. works fine..
http://images21.fotki.com/v515/photos/2/206474/1985653/DSC05779-vi.jpg
http://images21.fotki.com/v515/photos/2/206474/1985653/DSC05778-vi.jpg
http://images21.fotki.com/v515/photos/2/206474/1985653/DSC05780-vi.jpg

as shown here the "guide" or "fence" has been repaired by the previous owner..


http://images22.fotki.com/v518/photos/2/206474/1985653/DSC05777-vi.jpg

three sheetmetal froming hammers..
http://images21.fotki.com/v516/photos/2/206474/1985653/DSC05770-vi.jpg

12.00 - shipped

and one pexto? craftformer? stake.
http://images21.fotki.com/v578/photos/2/206474/1985653/DSC05772-vi.jpg

65.00 - shipped
i will take the hammers if there not gone ....let me know
sawzall
02-24-2007, 07:04 AM
hammers sold.

bead roller pending
westergardrods
02-24-2007, 10:22 AM
Is the bead roller sold? Please e mail me at westergard_rodcustom@hotmail.com
Da' Bomb
02-25-2007, 07:35 AM
pm sent
Pat
bellyjello
02-25-2007, 10:26 AM
I'd like to buy the beard roller. Could you email me at hilo68@comcast.net
geworthomd
08-22-2009, 10:08 AM
Do you still have the bead roller former for sale?
geworthomd@yahoo.com

Also, looking for a Niagra or Pexto that will roll 14guage

OLD niagara bead roller former etc.

very good condition.. I have used this from time to time.. works fine..
http://images21.fotki.com/v515/photos/2/206474/1985653/DSC05779-vi.jpg
http://images21.fotki.com/v515/photos/2/206474/1985653/DSC05778-vi.jpg
http://images21.fotki.com/v515/photos/2/206474/1985653/DSC05780-vi.jpg

as shown here the "guide" or "fence" has been repaired by the previous owner..


http://images22.fotki.com/v518/photos/2/206474/1985653/DSC05777-vi.jpg