zirad54
02-14-2007, 04:27 PM
Hey everyone, I was collecting and storing parts for a 51/52 but ended up with a 54 and decided to stay traditional so these things have got to go. All items are local pickup only in Pearland TX (south Houston). The walton stuff is brand new, has been in storage for just over a year.
Walton fabrications transmission crossmember 49-54 chevy, The crossmember is primarily bolt-in but does require a minimal amount of welding where it incorporates the stock oem K-member legs of the original chassis to retain chassis strength. The trans plate in the middle of the crossmember can be positioned for your choice from six popular automatic transmissions including: TH-350, TH-400, 700R4, Power Glide, 4L60 and, 200R4. (Note: The transmission crossmember will not work with manual transmissions... yet.) Asking SOLD
TH350 trans, rebuilt with shift kit, short tail. SOLD
The Walton Fabrication rear leaf spring kit
for the 1949-54 Chevy passenger car lowers the back of the car 5" from the stock height when you use the 2" lowering blocks included with the kit. This still leaves you with 3" to 3-1/4" of space between the rear axle housing and the frame. The kit includes: leaf springs, U-bolt kit w/5-hole plates and lower shock mounts, lowering blocks, front spring hangers, rear spring hangers, shackle kit, axle spring pads and all hardware. This is a complete, easy to install kit that bolts into the original rivet holes after you have drilled out the rivets and removed the original mounts. Asking $400.00
Also have 51/52 sedan seats (one complete set) $SOLD, 1 set HT rears with armrests $SOLD, 1 set sedan rears only $SOLD.
I also have a Walton Fabrications power brake & pedal assembly that mounts to the firewall for 49-54 chevys. Brand new for $375
Walton fabrications transmission crossmember 49-54 chevy, The crossmember is primarily bolt-in but does require a minimal amount of welding where it incorporates the stock oem K-member legs of the original chassis to retain chassis strength. The trans plate in the middle of the crossmember can be positioned for your choice from six popular automatic transmissions including: TH-350, TH-400, 700R4, Power Glide, 4L60 and, 200R4. (Note: The transmission crossmember will not work with manual transmissions... yet.) Asking SOLD
TH350 trans, rebuilt with shift kit, short tail. SOLD
The Walton Fabrication rear leaf spring kit
for the 1949-54 Chevy passenger car lowers the back of the car 5" from the stock height when you use the 2" lowering blocks included with the kit. This still leaves you with 3" to 3-1/4" of space between the rear axle housing and the frame. The kit includes: leaf springs, U-bolt kit w/5-hole plates and lower shock mounts, lowering blocks, front spring hangers, rear spring hangers, shackle kit, axle spring pads and all hardware. This is a complete, easy to install kit that bolts into the original rivet holes after you have drilled out the rivets and removed the original mounts. Asking $400.00
Also have 51/52 sedan seats (one complete set) $SOLD, 1 set HT rears with armrests $SOLD, 1 set sedan rears only $SOLD.
I also have a Walton Fabrications power brake & pedal assembly that mounts to the firewall for 49-54 chevys. Brand new for $375