DrDano
04-28-2004, 08:50 PM
Alright, I now have my Flat-0 adapter to go in my '51 Ford tudor. I'm planning to install the kit this weekend and my question is this, for those of you who might have done the same in your shoebox ford:
Did the stock trans cross member need to be modified? The damn thing is riveted in there, but I was wondering if I was going to need to use a different crossmember or a dropped one from Speedway per say.
If anyone has done this setup, please drop me a line so I can drop kick out another crossmember if need be. Thanks!
Did the stock trans cross member need to be modified? The damn thing is riveted in there, but I was wondering if I was going to need to use a different crossmember or a dropped one from Speedway per say.
If anyone has done this setup, please drop me a line so I can drop kick out another crossmember if need be. Thanks!