Need last part for"SURFER'S"Dragster, a toggle switch......

[cole]

My Dad is about done doing the 1964-66 "the Surfer's" car.

He cant find the right kill switch.

Tom Jobe used a open single pull switch he bought at SEARS in 1964.........it's like an old house main switch like the ones in frankenstein movie , but alot smaller it has a white ceramic base 2"x 1" 1/2 inches and with a single 2" inch lever that was dipped or had plastic to insulate you from power , a primative toggle switch, could have been used for alot of things in house ,auto machine, anyone have one??? please let me know salinasboy@aol.com or call 831 424-7753
THANKYOU!- Cole

[Roothawg]

Sorry man...no idea. I really dig the surfer's car. They wrote a story about it a few years back.

[Fat Hack]

I can dig through my Dad's stash of old oddball electrical stuff for ya...might find something like that!

I dug up this groovy blade type switch...might use it for my fuel pump!!! http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif http://www.jalopyjournal.com/ubbthreads/images/graemlins/cool.gif

(Mounted to the dash so that you're looking down at it in a vertical position).

[Two-Gun Bob]

Are you talking about a knife switch (not to be confused with a switchblade!)?


If so, lots of sources on the web...

Edit*** like what Fat Hack is showing...

[roadstar]

I just saw a switch like that in the new J C Whinty calaloge.

[Unkl Ian]

http://www.ibiblio.org/obp/electricCircuits/DC/50010.jpg

[cole]

unkl ian I think thats it .... knife switch ........I will show picture to my pops......

If its the one , can I buy it from you?

Thanks you guys! I will make it harder to find part next time. CF

[Jeem]

The "Surfer's" dragster.

Hey, no big deal.

Jeez Cole, you ARE the coolest.

[Unkl Ian]

[ QUOTE ]
can I buy it from you?


[/ QUOTE ]


Sorry Cole,that's just a picture I found on Google Image Search.
Just type in the name of what you are looking for,in this case "knife switch",
and it finds different pictures.http://images.google.com/

[Boones]

Cole this one is on ebay

item 3717467291

[DrJ]

That one even has an "accessory" position! http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif

I was searching too and one seller said
"Our stock of all knife switches but p/n 845 is now exhausted, and we see no hope of future stock, since Leviton has ceased to produce them. There are still a smattering of various types in the ham fest flea markets, so keep alert for them."
http://www.thewireman.com/ground.html
Call Cal-Aero in Paramount and see if they have one. they have lots of "odd" and surplus stuff there.
*
Cal Aero Supply Co.
13840 Paramount Boulevard
Paramount, CA *90723
888-807-4684

[C9]

Know any electrical utility workers?
PG&E in your area I think.
The ones to talk to are electricians and test technicians.
These folks work in the power stations proper.

The utilities use a similar switch behind the switchboards to kill power to relays etc.
Most times they have lots of the single pole single throw knife switches kicking around.
More than likely they'd pass one on for a good cause.

Another excellent source for these are electronic surplus stores and old hardware stores. (The kind with creaky wooden floors and bulk fasteners etc.)

[Uncle Pancakes]

Cole: Just so happens I work for PG&E so I will check with the electricians & relay techs at work and see what we can come up with. We have the ones like UnklIans post all over our switch yard as potential cutouts. I can also check with the electric supply house in Monterey and there is an OLD place in PG I think. If I can get one I'll drop it by the shop for you, I'm back at work mMonday so I'll do some digging around. Oh yeah and did you get the flyer for the Strangers BBQ? I shoved one under your door......
Ted

[Smokin Joe]

Is Jobe making a new wooden wing for the front too?
Man, I can't wait to see Adam Sorokin fire that mutha up at cacklefest! His daddy would be proud!
http://images5.fotki.com/v67/photos/2/213943/817643/Mike-vi.jpg

I knew they went to the right man when they went to Patty. This attention to detail on the knife switch confirms it! http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif

For those who don't know, you can read about the build here.
http://www.drag-city.com/

[Smokin Joe]

I'll put a pic of the knife switch up on Nitrogeezers. Maybe we'll get lucky.

[FEDER]

Last year at the CHRR I bought one of the Youngblood prints. The proceeds were going to the rebuilding of the car.Its a beautiful picture and spendy too. But hey that was My alltime favorite AA/FD team. I will be there again this year to see it cant wait.---FEDER

[lownrusty]

Cole I'll check our crane parts in the morning I think we have a couple of dif. kinds in some old junkers out back? Paul

[cole]

thanks guys, hope to come up with one soon, if anyone knows my pops "he dosent f--ck around" he drove 60 miles to a place and it was wrong. please feel free to call me if you find it, yes Tom Jobe is making the wing and picking parts for engine , it has drum brakes too. and two chutes


the one unkl posted dad said was it. knife is about two inches long.

Tom Job is a smart man , he works for team honda superbike and motocross teams, he sets up computer systems and is a one man think tank.

last time we talked he told me " after food and a piece of cardboard over your head , the rest of life is all bullshit" i try to remember those words when something gets me upset. amen thanks again,told dad you guys and .........gals will pull it if anyone can-- CF

[cole]

just wanted this up front again..........fishing

[Kaucher]

Hey Cole, I've been friends with Adam Sorokin, for 30 years now. He's spoke about you to me several times. I'm very http://www.jalopyjournal.com/ubbthreads/images/graemlins/cool.gifjazzed to see this car being put together. I know how excited Adam is about it. Good luck and i can't wait to see the finished car. KK

[Kaucher]

[ QUOTE ]

[ QUOTE ]


[/ QUOTE ]
Hey Adam is running at Famoso this weekend. Me and all his buddys from our old neighborhood are going to be there to support him. He's in a new Funny car this year.KK
.

[Smokin Joe]

Adam and I both have something in common. We've both parked our asses in a Surfer's car. http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif

Cole, let us know if you find the switch. One of the guys on Nitrogeezers thought he may have one and was going to check today.

[FONZI]

Cole,
Try these guys 562-695-9000. My bro is an electrician. He said they would prob. have it.


FONZI

[cole]

hey guys , no luck ? I called the #s given to try nothing.

just thought I would give it another go round. thanks CF

[Honest]

HOME DEPOT HAS THEM ...in the hard to find parts dept
(The bins in hardware dept)

[sodbuster]

Cole,
I am looking around at some old Hardware stores for the Knife switch. And I have emailed a couple of other guys that are looking also. It is pretty hard to find, I have been calling around and everyone has the same comment "I used to have ton's of them, but I have not seen them for years". I have also been told that you can order them, but I think they are the plastic ones. I will check one more source in downtown Kansas City today ( Architecture Salvage (http://www.aoarchitecturalsalvage.com/) ).

Chris Nelson
Kansas

[FONZI]

here are some others Cole:

http://www.science-city.com/knifeswitch.html

http://scientificsonline.com/product.asp?pn=3038806&bhcd2=1082657792

http://www.thesciencefair.com/Merchant2/merchant.mvc?Product_Code=311250&Screen=PROD

Check out this one: (scroll down to it)

http://www.phonecoinc.com/category.asp?map=1&hhrl=home&group=misc&gorl=group &category=New

fonzi

[max wedge]

Cole could you post a pic of the car?
Nice interview on the Mad Fab DVD!!

[max wedge]

Maybe if I look around I'll find a link...DUH!! dragster (http://www.drag-city.com/sling6.htm)

[Uncle Pancakes]

Cole: Talked with one of our relay techs yesterday and he is going to dig around at one of our main parts depots and see if there are any laying around as they have loads of old shit laying around. He said the new ones are different that we use now but maybe we'll get lucky and dig one up, I'll keep looking.
Ted

[Smokin Joe]

[ QUOTE ]
HOME DEPOT HAS THEM ...in the hard to find parts dept
(The bins in hardware dept)


[/ QUOTE ]

Honest, If your Home Depot really has one, with the white base, Grab it, send it to Cole or Patty and give me your PayPal address. I'll spring for it.
This one.
http://www.ibiblio.org/obp/electricCircuits/DC/50010.jpg

[daign]

take your pic and I'll buy it off ebay and send it to you. Just send me the check via snail mail.
http://i14.ebayimg.com/03/i/01/ae/d5/6c_1_b.JPG
$20 (http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=4665&item=38106152 40&rd=1&ssPageName=WDVW)
http://i24.ebayimg.com/03/i/01/ac/ae/a8_1_b.JPG
This ones killer (http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=66983&item=3810330 928&rd=1&ssPageName=WDVW)
http://i20.ebayimg.com/03/i/01/b1/fc/8e_1_b.JPG
$55 (http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=20581&item=2395954 269&rd=1&ssPageName=WDVW)
http://i10.ebayimg.com/03/i/01/b4/f7/90_1_b.JPG
$3 (http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=1502&item=30931349 42&rd=1&ssPageName=WDVW)
http://i5.ebayimg.com/03/i/01/b2/39/b3_1_b.JPG
$25 (http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=12&item=3719283923 &rd=1&ssPageName=WDVW)

Ebays a bitch but I'd be glad to help out.

-Dane

[Smokin Joe]

Well, those are all knife switches, but none of them look like the original one. Caddilacs and Corvettes both have 4 wheels, but that doesn't make them the same.

[sodbuster]

Man I looked all over for one today while out running around and they are hard to find. I have one guy at an electrical company looking for one and he said that he would get back to me Monday. I was also told to check "Train Hobby" stores, they were used for trains also.

Chris Nelson
Kansas

[cole]

Thanks for looking ya'all, Andrew found one and sent it to Surfer HQ in witchita ,Ks appreciate the help!!

Cole

[Smokin Joe]

Like, Far Out Dude!
That's like, totaly tubular! http://www.jalopyjournal.com/ubbthreads/images/graemlins/grin.gif

[sodbuster]

Cole,
If that other one does not work out for you guys, my next door neighbor found one for you in his junk pile. In case the other one does not work. It measures 1 1/2 long X 1 inch wide, with the porcelain base.

http://home.earthlink.net/~vindoux/sitebuildercontent/sitebuilderpictures/dscn0706.jpg

Chris Nelson
Kansas

[cole]

cool, thanks , i will let you know if he cant make what he has work. very cool of you, cf